SN65MLVD047APWRG4 belongs to the category of integrated circuits (ICs).
This product is commonly used in various electronic devices and systems for signal transmission and reception.
SN65MLVD047APWRG4 is available in a small-sized surface mount package.
The essence of this product lies in its ability to provide reliable and efficient data transmission in electronic systems.
SN65MLVD047APWRG4 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
SN65MLVD047APWRG4 operates based on the principles of low-voltage differential signaling. It uses a differential voltage swing to transmit data, which provides better noise immunity compared to single-ended signaling. The inputs receive differential signals, and the outputs provide differential signals as well.
SN65MLVD047APWRG4 finds applications in various fields, including:
(Note: The above alternative models are just examples and not an exhaustive list.)
Word count: 550 words
Sure! Here are 10 common questions and answers related to the application of SN65MLVD047APWRG4 in technical solutions:
Q: What is SN65MLVD047APWRG4? A: SN65MLVD047APWRG4 is a quad low-voltage differential signaling (LVDS) driver/receiver designed for high-speed data transmission over twisted-pair copper cables.
Q: What is the maximum data rate supported by SN65MLVD047APWRG4? A: SN65MLVD047APWRG4 supports a maximum data rate of 400 Mbps.
Q: Can SN65MLVD047APWRG4 be used for point-to-point communication? A: Yes, SN65MLVD047APWRG4 can be used for point-to-point communication as it provides four independent LVDS channels.
Q: What is the operating voltage range of SN65MLVD047APWRG4? A: SN65MLVD047APWRG4 operates with a supply voltage range of 3.0V to 3.6V.
Q: Is SN65MLVD047APWRG4 compatible with other LVDS devices? A: Yes, SN65MLVD047APWRG4 is compatible with other LVDS devices that adhere to the same LVDS standard.
Q: Can SN65MLVD047APWRG4 be used in automotive applications? A: Yes, SN65MLVD047APWRG4 is suitable for automotive applications as it meets the AEC-Q100 qualification requirements.
Q: Does SN65MLVD047APWRG4 support hot-plugging of cables? A: No, SN65MLVD047APWRG4 does not support hot-plugging. It is recommended to power down the device before connecting or disconnecting cables.
Q: What is the typical output voltage swing of SN65MLVD047APWRG4? A: The typical output voltage swing of SN65MLVD047APWRG4 is 350 mV.
Q: Can SN65MLVD047APWRG4 be used in industrial control systems? A: Yes, SN65MLVD047APWRG4 is suitable for industrial control systems due to its robustness and noise immunity.
Q: Does SN65MLVD047APWRG4 require external termination resistors? A: Yes, SN65MLVD047APWRG4 requires external termination resistors to match the characteristic impedance of the transmission line.
Please note that these answers are general and may vary depending on the specific application and requirements.