Lihat spesifikasi untuk detail produk.
SN65HVD379DG4
Product Overview
Category: Integrated Circuit (IC)
Use: The SN65HVD379DG4 is a high-speed CAN transceiver designed for use in automotive and industrial applications. It provides a physical interface between a microcontroller and the CAN bus, allowing for reliable communication over long distances.
Characteristics: - High-speed data rates up to 1 Mbps - Low standby current consumption - Robust protection against electrostatic discharge (ESD) - Wide supply voltage range of 3 V to 5.5 V - Temperature range from -40°C to +125°C
Package: The SN65HVD379DG4 is available in a small outline integrated circuit (SOIC) package, which offers ease of integration into various electronic systems.
Essence: This IC serves as a crucial component in CAN networks, enabling the transmission and reception of data packets between different nodes in the network.
Packaging/Quantity: The SN65HVD379DG4 is typically sold in reels or tubes, with a quantity of 250 units per reel/tube.
Specifications
- Supply Voltage Range: 3 V to 5.5 V
- Data Rate: Up to 1 Mbps
- Operating Temperature Range: -40°C to +125°C
- Standby Current: 370 µA (typical)
- ESD Protection: ±16 kV (Human Body Model)
- Package Type: SOIC-8
Pin Configuration
The SN65HVD379DG4 features an 8-pin SOIC package with the following pin configuration:
Pin 1: VCC
Pin 2: GND
Pin 3: CANH
Pin 4: CANL
Pin 5: RS
Pin 6: NC
Pin 7: NC
Pin 8: VREF
Functional Features
- High-speed CAN communication: The SN65HVD379DG4 supports data rates up to 1 Mbps, allowing for fast and efficient communication between nodes in a CAN network.
- Low standby current consumption: With a typical standby current of only 370 µA, this transceiver helps minimize power consumption in applications where energy efficiency is crucial.
- Robust ESD protection: The IC is designed to withstand electrostatic discharge events of up to ±16 kV, ensuring reliable operation even in harsh environments.
- Wide supply voltage range: The SN65HVD379DG4 can operate from a supply voltage as low as 3 V, making it suitable for a wide range of applications.
Advantages and Disadvantages
Advantages: - High-speed data transmission - Low power consumption - Robust ESD protection - Wide supply voltage range
Disadvantages: - Limited pin configuration options - Requires external components for complete CAN node implementation
Working Principles
The SN65HVD379DG4 operates based on the principles of the Controller Area Network (CAN) protocol. It uses differential signaling on the CANH and CANL lines to transmit and receive data packets. The transceiver converts the digital signals from the microcontroller into appropriate voltage levels for transmission over the CAN bus. It also provides protection against common mode voltage variations and noise, ensuring reliable data transfer.
Detailed Application Field Plans
The SN65HVD379DG4 is widely used in various automotive and industrial applications, including:
Automotive:
- In-vehicle networking systems
- Engine control units (ECUs)
- Body control modules
- Infotainment systems
Industrial:
- Factory automation
- Process control systems
- Building automation
- Robotics
Detailed and Complete Alternative Models
- MCP2551: This is another popular CAN transceiver with similar features and performance characteristics.
- TJA1050: A widely used CAN transceiver known for its high-speed capabilities and robustness.
- SN65HVD230: A lower-cost alternative with slightly reduced data rates but suitable for many applications.
These alternative models offer similar functionality to the SN65HVD379DG4 and can be considered as replacements depending on specific requirements and cost considerations.
In conclusion, the SN65HVD379DG4 is a high-speed CAN transceiver designed for automotive and industrial applications. With its robust features, wide supply voltage range, and low power consumption, it provides reliable communication in CAN networks. Its compact package and availability in reels/tubes make it convenient for integration into various electronic systems.
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN65HVD379DG4 dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of SN65HVD379DG4 in technical solutions:
Q: What is SN65HVD379DG4? A: SN65HVD379DG4 is a high-speed CAN transceiver designed for use in industrial automation, automotive, and other applications that require reliable communication over a CAN bus.
Q: What is the operating voltage range of SN65HVD379DG4? A: The operating voltage range of SN65HVD379DG4 is typically between 3.3V and 5V.
Q: Can SN65HVD379DG4 be used in automotive applications? A: Yes, SN65HVD379DG4 is suitable for automotive applications as it meets the requirements of the Controller Area Network (CAN) protocol commonly used in vehicles.
Q: What is the maximum data rate supported by SN65HVD379DG4? A: SN65HVD379DG4 supports data rates up to 1 Mbps, making it suitable for high-speed CAN networks.
Q: Does SN65HVD379DG4 have built-in protection features? A: Yes, SN65HVD379DG4 includes built-in protection features such as thermal shutdown, undervoltage lockout, and bus fault protection.
Q: Can SN65HVD379DG4 be used in harsh environments? A: Yes, SN65HVD379DG4 is designed to operate reliably in harsh environments with its robust ESD protection and wide temperature range (-40°C to +125°C).
Q: How many nodes can be connected to a CAN bus using SN65HVD379DG4? A: SN65HVD379DG4 supports up to 120 nodes on a CAN bus, making it suitable for both small and large network configurations.
Q: Does SN65HVD379DG4 require external components for operation? A: Yes, SN65HVD379DG4 requires external passive components such as resistors and capacitors for proper operation.
Q: Can SN65HVD379DG4 be used in half-duplex or full-duplex mode? A: SN65HVD379DG4 is designed for half-duplex communication, where data can be transmitted and received on the same bus line.
Q: Is SN65HVD379DG4 compatible with other CAN transceivers? A: Yes, SN65HVD379DG4 is compatible with other CAN transceivers that adhere to the CAN protocol standards, allowing for interoperability in mixed networks.
Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult the manufacturer for detailed information.