Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN65CML100DR
Lihat Detail Lembar Data

SN65CML100DR

Product Overview

  • Category: Integrated Circuit
  • Use: Signal Conditioning and Data Transmission
  • Characteristics: High-speed, Low-power, Differential Receiver
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Signal conditioning and data transmission for high-speed communication systems
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 3.0V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Input Common Mode Voltage Range: -0.5V to 2.4V
  • Output Voltage Swing: 400mV (differential)
  • Maximum Data Rate: 1.25Gbps
  • Power Consumption: 50mW (typical)

Detailed Pin Configuration

The SN65CML100DR has a total of 8 pins arranged as follows:

  1. VCC: Power supply pin
  2. GND: Ground pin
  3. OUTB: Complementary output B
  4. OUTA: Complementary output A
  5. VREF: Reference voltage input
  6. INB: Non-inverting input B
  7. INA: Non-inverting input A
  8. EN: Enable pin

Functional Features

  • High-speed differential receiver with low power consumption
  • Wide input common mode voltage range for compatibility with various signal levels
  • Built-in reference voltage generator for accurate signal detection
  • Enable pin for power management and standby mode operation
  • Complementary outputs for improved noise immunity

Advantages and Disadvantages

Advantages: - High-speed data transmission capability - Low power consumption - Wide input voltage range - Accurate signal detection - Improved noise immunity

Disadvantages: - Limited maximum data rate compared to some alternative models - Requires external reference voltage for proper operation

Working Principles

The SN65CML100DR is designed to receive high-speed differential signals and condition them for further processing in communication systems. It operates by amplifying and converting the differential input signals into complementary output signals. The built-in reference voltage generator ensures accurate signal detection, while the wide input common mode voltage range allows compatibility with various signal levels.

Detailed Application Field Plans

The SN65CML100DR is commonly used in applications that require high-speed data transmission and signal conditioning. Some of its typical application fields include:

  1. Telecommunications: Used in high-speed communication systems, such as fiber optic networks and wireless base stations.
  2. Data Centers: Employed in data centers for signal conditioning and data transmission between servers and networking equipment.
  3. Industrial Automation: Utilized in industrial automation systems for reliable and fast data transfer between control units and sensors/actuators.
  4. Automotive Electronics: Integrated into automotive electronics for high-speed data communication between different vehicle modules.

Detailed and Complete Alternative Models

  1. SN65CML100DGKR: Similar to SN65CML100DR but available in a smaller VSSOP package.
  2. SN65CML100DCKR: Similar to SN65CML100DR but available in a smaller SC70 package.
  3. SN65CML100DCTR: Similar to SN65CML100DR but available in a smaller SOT-23 package.
  4. SN65CML100DGNR: Similar to SN65CML100DR but available in a smaller LLP package.

These alternative models offer similar functionality and characteristics but differ in package size and pin configuration.

In conclusion, the SN65CML100DR is a high-speed, low-power differential receiver integrated circuit used for signal conditioning and data transmission in various communication systems. Its wide input voltage range, accurate signal detection, and complementary outputs make it suitable for applications requiring reliable and fast data transfer.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN65CML100DR dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN65CML100DR in technical solutions:

  1. Q: What is SN65CML100DR? A: SN65CML100DR is a high-speed differential line driver/receiver commonly used in applications requiring low voltage swing, such as data communication systems.

  2. Q: What is the operating voltage range of SN65CML100DR? A: SN65CML100DR operates within a voltage range of 3.0V to 3.6V.

  3. Q: What is the maximum data rate supported by SN65CML100DR? A: SN65CML100DR supports data rates up to 3.125 Gbps.

  4. Q: Can SN65CML100DR be used for both single-ended and differential signaling? A: No, SN65CML100DR is specifically designed for differential signaling applications.

  5. Q: What is the typical output voltage swing of SN65CML100DR? A: The typical output voltage swing of SN65CML100DR is around 400 mV.

  6. Q: Does SN65CML100DR require external termination resistors? A: Yes, SN65CML100DR requires external termination resistors to match the characteristic impedance of the transmission line.

  7. Q: Can SN65CML100DR be used in point-to-point or multi-drop configurations? A: SN65CML100DR is primarily designed for point-to-point configurations, but it can also be used in certain multi-drop scenarios with appropriate considerations.

  8. Q: What is the power supply current consumption of SN65CML100DR? A: The power supply current consumption of SN65CML100DR is typically around 100 mA.

  9. Q: Is SN65CML100DR compatible with other differential line drivers/receivers? A: Yes, SN65CML100DR is compatible with other devices that follow the CML (Current Mode Logic) signaling standard.

  10. Q: What are some typical applications of SN65CML100DR? A: SN65CML100DR is commonly used in high-speed data communication systems, such as Gigabit Ethernet, Fibre Channel, and Serial ATA (SATA) interfaces.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.