Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN64BCT126ANG4
Lihat Detail Lembar Data

SN64BCT126ANG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Buffer/Driver
  • Characteristics: High-speed, non-inverting, tri-state
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Logic gate with four independent buffer/driver circuits
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • High-Level Input Voltage: 2V to VCC
  • Low-Level Input Voltage: 0V to 0.8V
  • High-Level Output Voltage: VCC - 0.5V
  • Low-Level Output Voltage: 0.5V
  • Maximum Operating Frequency: 100MHz

Detailed Pin Configuration

The SN64BCT126ANG4 has a 14-pin SOIC package with the following pin configuration:

  1. GND (Ground)
  2. A1 (Input A1)
  3. Y1 (Output Y1)
  4. A2 (Input A2)
  5. Y2 (Output Y2)
  6. A3 (Input A3)
  7. Y3 (Output Y3)
  8. A4 (Input A4)
  9. Y4 (Output Y4)
  10. OE (Output Enable)
  11. GND (Ground)
  12. VCC (Supply Voltage)
  13. B1 (Input B1)
  14. B2 (Input B2)

Functional Features

  • Non-inverting buffer/driver with tri-state outputs
  • Four independent buffer/driver circuits in a single IC
  • High-speed operation suitable for demanding applications
  • Wide supply voltage range allows compatibility with various systems
  • Tri-state outputs enable bus sharing and reduce contention issues

Advantages and Disadvantages

Advantages: - High-speed operation ensures efficient data transmission - Tri-state outputs allow for bus sharing, reducing system complexity - Wide supply voltage range provides flexibility in different applications - Compact package saves board space

Disadvantages: - Limited number of buffer/driver circuits per IC - Not suitable for low-power applications due to higher power consumption

Working Principles

The SN64BCT126ANG4 is a non-inverting buffer/driver IC that amplifies and buffers digital signals. It accepts four independent input signals (A1-A4) and provides corresponding output signals (Y1-Y4). The tri-state outputs allow the IC to be effectively disconnected from the bus when not in use, preventing signal interference.

Detailed Application Field Plans

The SN64BCT126ANG4 is commonly used in various applications, including:

  1. Data communication systems: Ensures reliable signal transmission between different components.
  2. Industrial automation: Provides signal buffering and driving capabilities in control systems.
  3. Automotive electronics: Facilitates data transfer between different modules in vehicles.
  4. Computer peripherals: Enables efficient data transfer between devices such as printers and scanners.
  5. Telecommunications: Used in networking equipment for signal amplification and buffering.

Detailed and Complete Alternative Models

  1. SN74BCT125N: Similar functionality with quad buffer/driver circuits, but in DIP package.
  2. SN74LVC1G125DBVR: Single buffer/driver with tri-state output, suitable for low-power applications.
  3. SN74HC244N: Octal buffer/driver with tri-state outputs, ideal for high-speed data buses.

These alternative models offer similar functionality to the SN64BCT126ANG4 and can be considered based on specific application requirements.

Word count: 470 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN64BCT126ANG4 dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN64BCT126ANG4 in technical solutions:

  1. Q: What is the SN64BCT126ANG4? A: The SN64BCT126ANG4 is a quad bus buffer gate with 3-state outputs, commonly used in digital logic circuits.

  2. Q: What is the operating voltage range for SN64BCT126ANG4? A: The operating voltage range for SN64BCT126ANG4 is typically between 4.5V and 5.5V.

  3. Q: What is the maximum output current that SN64BCT126ANG4 can drive? A: SN64BCT126ANG4 can drive up to 24mA of output current per channel.

  4. Q: Can SN64BCT126ANG4 be used as a level shifter? A: Yes, SN64BCT126ANG4 can be used as a level shifter to convert signals between different voltage levels.

  5. Q: How many channels does SN64BCT126ANG4 have? A: SN64BCT126ANG4 has four independent channels.

  6. Q: What is the propagation delay of SN64BCT126ANG4? A: The typical propagation delay of SN64BCT126ANG4 is around 7ns.

  7. Q: Is SN64BCT126ANG4 compatible with TTL logic levels? A: Yes, SN64BCT126ANG4 is compatible with both TTL and CMOS logic levels.

  8. Q: Can SN64BCT126ANG4 be used in high-speed applications? A: While SN64BCT126ANG4 is not specifically designed for high-speed applications, it can still be used in moderate-speed digital systems.

  9. Q: What is the power supply voltage required for SN64BCT126ANG4? A: SN64BCT126ANG4 requires a single power supply voltage of 5V.

  10. Q: Can SN64BCT126ANG4 be used in bidirectional data transmission? A: No, SN64BCT126ANG4 is a unidirectional buffer and does not support bidirectional data transmission.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.