Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
OPA171AIDBVT
Lihat Detail Lembar Data

OPA171AIDBVT

Introduction

The OPA171AIDBVT is a precision operational amplifier belonging to the category of integrated circuits. It is widely used in various electronic applications due to its high precision and performance characteristics.

Basic Information Overview

  • Category: Integrated Circuit
  • Use: Precision operational amplifier
  • Characteristics: High precision, low offset voltage, low noise
  • Package: SOT-23-5 package
  • Essence: Precision signal amplification
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies by supplier

Specifications

  • Supply Voltage: ±1.35V to ±18V
  • Input Offset Voltage: 150µV (max)
  • Gain Bandwidth Product: 10MHz
  • Slew Rate: 7V/µs
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The OPA171AIDBVT has a standard pin configuration with 5 pins: 1. OUT: Output 2. V+: Positive supply voltage 3. V-: Negative supply voltage 4. NC: Not connected 5. IN-: Inverting input 6. IN+: Non-inverting input

Functional Features

  • High precision amplification
  • Low offset voltage for accurate signal processing
  • Wide operating voltage range
  • Low noise for sensitive applications

Advantages and Disadvantages

Advantages

  • High precision amplification
  • Wide operating voltage range
  • Low noise for sensitive applications

Disadvantages

  • Limited output current capability
  • Higher cost compared to general-purpose op-amps

Working Principles

The OPA171AIDBVT operates based on the principles of differential amplification, providing precise amplification of small signals with minimal distortion and noise.

Detailed Application Field Plans

The OPA171AIDBVT finds extensive use in the following application fields: - Precision instrumentation - Sensor signal conditioning - Data acquisition systems - Test and measurement equipment - Audio amplification

Detailed and Complete Alternative Models

Some alternative models to OPA171AIDBVT include: - OPA170 - OPA172 - OPA177 - OPA189

In conclusion, the OPA171AIDBVT is a precision operational amplifier that offers high performance and accuracy, making it suitable for a wide range of electronic applications.

Word Count: 330

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan OPA171AIDBVT dalam solusi teknis

  1. What is the OPA171AIDBVT used for?

    • The OPA171AIDBVT is a precision operational amplifier that is commonly used in applications requiring high accuracy and low noise, such as sensor signal conditioning, data acquisition systems, and instrumentation.

  2. What is the supply voltage range for the OPA171AIDBVT?

    • The OPA171AIDBVT has a wide supply voltage range of 2.7V to 36V, making it suitable for a variety of power supply configurations.

  3. What is the typical input offset voltage of the OPA171AIDBVT?

    • The typical input offset voltage of the OPA171AIDBVT is 150µV, which contributes to its high precision performance.

  4. Can the OPA171AIDBVT operate in single-supply applications?

    • Yes, the OPA171AIDBVT is designed to operate in both single-supply and split-supply applications, providing flexibility in system design.

  5. What is the bandwidth of the OPA171AIDBVT?

    • The OPA171AIDBVT has a bandwidth of 10MHz, allowing it to handle high-frequency signals with minimal distortion.

  6. Is the OPA171AIDBVT unity-gain stable?

    • Yes, the OPA171AIDBVT is unity-gain stable, making it suitable for applications where a wide range of gain settings are required.

  7. Does the OPA171AIDBVT have thermal shutdown protection?

    • Yes, the OPA171AIDBVT features thermal shutdown protection, which helps prevent damage due to excessive temperature.

  8. What is the input bias current of the OPA171AIDBVT?

    • The input bias current of the OPA171AIDBVT is typically 0.5pA, minimizing errors in high-impedance sensor interfaces and other precision circuits.

  9. Can the OPA171AIDBVT drive capacitive loads?

    • Yes, the OPA171AIDBVT is capable of driving capacitive loads up to 100pF without stability issues, enhancing its versatility in various applications.

  10. Are there any application notes or reference designs available for the OPA171AIDBVT?

    • Yes, Texas Instruments provides comprehensive application notes and reference designs for the OPA171AIDBVT, offering guidance on its optimal use in different technical solutions.