Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
INA219AID
Lihat Detail Lembar Data

INA219AID

Product Overview

Category: Integrated Circuit (IC)

Use: The INA219AID is a high-side current shunt and power monitor IC that provides accurate voltage, current, and power measurements. It is commonly used in various applications where precise monitoring of power consumption is required.

Characteristics: - Accurate measurement of voltage, current, and power - High-side current sensing - Wide input voltage range - Low offset voltage - Programmable calibration - Digital output interface

Package: The INA219AID is available in a small SOT23-8 package, which is suitable for space-constrained applications.

Essence: The essence of the INA219AID lies in its ability to accurately measure current and voltage, making it an essential component in power monitoring systems.

Packaging/Quantity: The INA219AID is typically sold in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 0V to 26V
  • Current Measurement Range: ±3.2A
  • Voltage Measurement Resolution: 0.01V
  • Current Measurement Resolution: 1mA
  • Power Measurement Resolution: 20mW
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The INA219AID has a total of 8 pins, which are assigned specific functions:

  1. V+ (Positive Supply Voltage)
  2. V- (Negative Supply Voltage/Ground)
  3. SDA (Serial Data Input/Output)
  4. SCL (Serial Clock Input)
  5. ADDR (Address Selection)
  6. ALERT (Alert Output)
  7. NC (No Connection)
  8. GND (Ground)

Functional Features

  • High accuracy current and voltage measurements
  • Programmable calibration settings
  • Configurable alert functionality
  • I2C interface for easy integration with microcontrollers
  • Low power consumption

Advantages and Disadvantages

Advantages: - Accurate and precise measurements - Wide input voltage range - Small package size for space-constrained applications - Programmable calibration for improved accuracy - Easy integration with microcontrollers

Disadvantages: - Limited current measurement range (±3.2A) - Requires external components for operation - Relatively high cost compared to some alternatives

Working Principles

The INA219AID utilizes a high-side current shunt resistor to measure the voltage drop across it, which is proportional to the current flowing through the load. By measuring this voltage drop and the input voltage, the IC calculates the current and power consumption accurately.

Application Field Plans

The INA219AID finds applications in various fields, including but not limited to: 1. Battery charging systems 2. Power management in portable devices 3. Solar power systems 4. Industrial automation 5. Motor control systems 6. Energy monitoring and metering

Alternative Models

  1. INA219BID: Similar to INA219AID, but with a higher current measurement range of ±4.2A.
  2. INA219CID: Offers lower power consumption and improved accuracy compared to INA219AID.
  3. INA220AID: Provides additional features such as bus voltage measurement and bidirectional current sensing.

These alternative models offer similar functionalities with slight variations to cater to different application requirements.

Word count: 345 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan INA219AID dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of INA219AID in technical solutions:

  1. Q: What is the INA219AID?
    A: The INA219AID is a high-side current shunt and power monitor IC that can measure voltage, current, and power consumption in a circuit.

  2. Q: How does the INA219AID work?
    A: The INA219AID measures the voltage drop across a shunt resistor to calculate the current flowing through it. It also measures the bus voltage to calculate power consumption.

  3. Q: What is the maximum current that the INA219AID can measure?
    A: The INA219AID can measure currents up to ±3.2A.

  4. Q: Can the INA219AID measure both positive and negative currents?
    A: Yes, the INA219AID can measure both positive and negative currents.

  5. Q: What is the accuracy of the INA219AID?
    A: The INA219AID has an accuracy of ±0.5% for voltage measurement and ±1% for current measurement.

  6. Q: Can the INA219AID measure power consumption?
    A: Yes, the INA219AID can calculate power consumption by multiplying the measured current with the bus voltage.

  7. Q: Is the INA219AID suitable for low-power applications?
    A: Yes, the INA219AID has a low quiescent current and is suitable for low-power applications.

  8. Q: Can the INA219AID be used in battery monitoring systems?
    A: Yes, the INA219AID can be used in battery monitoring systems to measure current and power consumption.

  9. Q: Does the INA219AID have built-in protection features?
    A: Yes, the INA219AID has built-in overvoltage, undervoltage, and overcurrent protection features.

  10. Q: What is the communication interface of the INA219AID?
    A: The INA219AID uses I2C interface for communication with microcontrollers or other devices.

Please note that these answers are general and may vary depending on the specific implementation and datasheet of the INA219AID.