Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
DS92CK16TMTC

DS92CK16TMTC

Product Overview

  • Category: Integrated Circuit
  • Use: High-speed serializer and deserializer (SerDes) for automotive applications
  • Characteristics:
    • Supports data rates up to 2.5 Gbps
    • Operates over a wide temperature range (-40°C to +105°C)
    • Low power consumption
    • Robust ESD protection
  • Package: TQFP (Thin Quad Flat Package)
  • Essence: DS92CK16TMTC is a high-performance SerDes IC designed specifically for automotive applications.
  • Packaging/Quantity: Available in tape and reel packaging, with 250 units per reel.

Specifications

  • Data Rate: Up to 2.5 Gbps
  • Operating Temperature Range: -40°C to +105°C
  • Power Supply Voltage: 3.3V
  • Package Type: TQFP
  • Pin Count: 48

Detailed Pin Configuration

The DS92CK16TMTC has a total of 48 pins. The pin configuration is as follows:

  1. VDDA
  2. VSSA
  3. VDDC
  4. VSSC
  5. CLKIN
  6. RXINP
  7. RXINN
  8. RXOUTP
  9. RXOUTN
  10. RXCLKP
  11. RXCLKN
  12. RXERRB
  13. RXERRE
  14. RXERRD
  15. RXERRC
  16. RXERRA
  17. RXERRG
  18. RXERRF
  19. RXERRH
  20. RXERRI
  21. RXERRJ
  22. RXERRK
  23. RXERRL
  24. RXMUTE
  25. RXMUTEB
  26. RXMUTEC
  27. RXMUTED
  28. RXMUTEE
  29. RXMUTEF
  30. RXMUTEG
  31. RXMUTEH
  32. RXMUTEI
  33. RXMUTEJ
  34. RXMUTEK
  35. RXMUTEL
  36. RXMUTEM
  37. RXMUTEN
  38. RXMUTEP
  39. RXMUTEQ
  40. RXMUTER
  41. RXMUTES
  42. RXMUTET
  43. RXMUTEU
  44. RXMUTEV
  45. RXMUTEW
  46. RXMUTEX
  47. RXMUTEY
  48. RXMUTEZ

Functional Features

  • High-speed data transmission and reception
  • Built-in ESD protection for enhanced reliability
  • Low power consumption for efficient operation
  • Wide operating temperature range suitable for automotive environments
  • Supports various automotive communication protocols

Advantages and Disadvantages

Advantages

  • High data rate capability
  • Robust ESD protection
  • Wide temperature range operation
  • Low power consumption

Disadvantages

  • Limited pin count for complex applications
  • Specific to automotive applications, may not be suitable for other industries

Working Principles

The DS92CK16TMTC is a high-speed serializer and deserializer IC designed for automotive applications. It converts parallel data into a serial stream for transmission over a single differential pair. On the receiving end, it converts the serial stream back into parallel data. The IC operates at high speeds of up to 2.5 Gbps and ensures reliable data transmission in harsh automotive environments.

Detailed Application Field Plans

The DS92CK16TMTC is widely used in various automotive applications, including:

  1. Automotive infotainment systems
  2. Advanced driver-assistance systems (ADAS)
  3. Automotive cameras and vision systems
  4. In-vehicle networking
  5. Automotive diagnostic tools

Detailed and Complete Alternative Models

  1. DS90C387A: High-speed LVDS Serializer/Deserializer IC
  2. DS92LV1212A: 12-bit Serializer/Deserializer with LVDS Interface
  3. DS90CR285: 28-Bit Channel Link II Deserializer

These alternative models offer similar functionality to the DS92CK16TMTC and can be considered as alternatives based on specific application requirements.

Word count: 512 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan DS92CK16TMTC dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of DS92CK16TMTC in technical solutions:

  1. Q: What is DS92CK16TMTC? A: DS92CK16TMTC is a high-speed serializer and deserializer (SerDes) chip designed for automotive applications.

  2. Q: What is the purpose of DS92CK16TMTC in technical solutions? A: DS92CK16TMTC enables the transmission of high-speed data over long distances, making it suitable for applications like automotive camera systems.

  3. Q: What is the maximum data rate supported by DS92CK16TMTC? A: DS92CK16TMTC supports a maximum data rate of 1.5 Gbps per channel.

  4. Q: Can DS92CK16TMTC be used in other industries apart from automotive? A: Yes, while DS92CK16TMTC is primarily designed for automotive applications, it can also be used in other industries that require high-speed data transmission.

  5. Q: How many channels does DS92CK16TMTC support? A: DS92CK16TMTC supports up to 16 channels, allowing for the simultaneous transmission of multiple data streams.

  6. Q: What is the power supply voltage range for DS92CK16TMTC? A: The power supply voltage range for DS92CK16TMTC is typically between 1.8V and 3.3V.

  7. Q: Does DS92CK16TMTC support different video formats? A: Yes, DS92CK16TMTC supports various video formats, including MIPI CSI-2, FPD-Link III, and others.

  8. Q: Can DS92CK16TMTC be used for both short-range and long-range data transmission? A: Yes, DS92CK16TMTC is designed to support both short-range and long-range data transmission, making it versatile for different applications.

  9. Q: What are the typical applications of DS92CK16TMTC in automotive solutions? A: DS92CK16TMTC is commonly used in automotive camera systems, surround-view systems, advanced driver-assistance systems (ADAS), and infotainment systems.

  10. Q: Are there any evaluation boards or development kits available for DS92CK16TMTC? A: Yes, Maxim Integrated provides evaluation boards and development kits that help engineers prototype and test DS92CK16TMTC in their technical solutions.

Please note that these answers are general and may vary depending on specific use cases and requirements.