The DS90CR281MTDX has a total of 56 pins. The pin configuration is as follows:
The DS90CR281MTDX operates by converting parallel RGB data into a serialized data stream for transmission over a high-speed serial link. On the receiving end, it deserializes the received data back into parallel RGB format. The IC incorporates clock recovery circuitry to ensure accurate synchronization of the transmitted data.
The DS90CR281MTDX is widely used in various video transmission applications, including:
These alternative models offer similar functionality and can be considered based on specific requirements and constraints.
Word count: 408 words
Sure! Here are 10 common questions and answers related to the application of DS90CR281MTDX in technical solutions:
Q: What is DS90CR281MTDX? A: DS90CR281MTDX is a serializer/deserializer (SerDes) chip designed for high-speed data transmission over long distances.
Q: What is the maximum data rate supported by DS90CR281MTDX? A: DS90CR281MTDX supports a maximum data rate of 1.6 Gbps.
Q: What is the typical application of DS90CR281MTDX? A: DS90CR281MTDX is commonly used in video surveillance systems, automotive infotainment, medical imaging, and other applications requiring long-range data transmission.
Q: Can DS90CR281MTDX be used for both point-to-point and multipoint connections? A: No, DS90CR281MTDX is primarily designed for point-to-point connections.
Q: What is the maximum cable length supported by DS90CR281MTDX? A: DS90CR281MTDX can support cable lengths up to 15 meters, depending on the cable quality and signal integrity requirements.
Q: Does DS90CR281MTDX require any external components for operation? A: Yes, DS90CR281MTDX requires external termination resistors and capacitors for proper operation.
Q: What power supply voltage does DS90CR281MTDX require? A: DS90CR281MTDX operates with a single 3.3V power supply.
Q: Can DS90CR281MTDX handle different video formats? A: Yes, DS90CR281MTDX supports various video formats, including RGB, YUV, and DVI.
Q: Does DS90CR281MTDX support hot-plugging of cables? A: No, DS90CR281MTDX does not support hot-plugging. It is recommended to connect/disconnect cables when the power is off.
Q: Is DS90CR281MTDX compatible with other SerDes chips? A: Yes, DS90CR281MTDX is compatible with other SerDes chips that follow the same signaling standards, such as LVDS or SubLVDS.
Please note that these answers are general and may vary depending on specific implementation requirements and datasheet specifications.