CLVC16244AIDGGREP

Product Overview

• Category: Integrated Circuit (IC)
• Use: Logic Level Shifter
• Characteristics: Bi-directional voltage level translator with 16-bit wide input/output bus
• Package: TSSOP-48
• Essence: Translates signals between different voltage levels in digital systems
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage Range: 1.2V to 3.6V
• High-level Input Voltage (VIH): 2.0V to VCC + 0.5V
• Low-level Input Voltage (VIL): -0.5V to 0.8V
• High-level Output Voltage (VOH): 2.4V to VCC
• Low-level Output Voltage (VOL): 0V to 0.4V
• Maximum Operating Frequency: 100MHz

Detailed Pin Configuration

The CLVC16244AIDGGREP has a total of 48 pins arranged as follows:

• Pin 1: OE (Output Enable) 1
• Pin 2: I/O 1A
• Pin 3: I/O 1B
• Pin 4: GND (Ground)
• Pin 5: I/O 2B
• Pin 6: I/O 2A
• Pin 7: VCC (Supply Voltage)
• Pin 8: OE (Output Enable) 2
• Pins 9-16: I/O 3-10A
• Pins 17-24: I/O 3-10B
• Pins 25-32: GND (Ground)
• Pins 33-40: I/O 11-18B
• Pins 41-48: I/O 11-18A

Functional Features

• Bi-directional voltage level translation
• Supports 16-bit wide input/output bus
• Low power consumption
• High-speed operation
• 3-state outputs for easy interfacing with other devices

Advantages and Disadvantages

Advantages: - Wide supply voltage range allows compatibility with various systems - Bi-directional translation simplifies signal communication between different voltage domains - High-speed operation enables efficient data transfer - 3-state outputs facilitate easy connection to multiple devices

Disadvantages: - Limited maximum operating frequency compared to some alternative models - TSSOP-48 package may require careful handling during assembly

Working Principles

The CLVC16244AIDGGREP is a logic level shifter that translates signals between different voltage levels in digital systems. It utilizes a combination of MOSFETs and control circuitry to achieve bi-directional voltage level translation. The device operates by monitoring the input voltage levels and adjusting the output voltage levels accordingly, ensuring proper signal communication between different voltage domains.

Detailed Application Field Plans

The CLVC16244AIDGGREP can be used in various applications where voltage level translation is required. Some potential application fields include:

1. Microcontroller Interfacing: The IC can be used to interface microcontrollers operating at different voltage levels, enabling seamless communication between them.
2. Sensor Networks: It can be employed in sensor networks to translate signals between sensors and microcontrollers with different voltage requirements.
3. Communication Systems: The device can be utilized in communication systems to bridge the gap between devices operating at different voltage levels, such as UART or I2C interfaces.
4. Industrial Automation: It can be integrated into industrial automation systems to enable communication between different modules operating at varying voltage levels.

Detailed and Complete Alternative Models

1. SN74LVC16244ADGGR: Similar 16-bit bi-directional voltage level translator with a different package (TSSOP-48).
2. TXB0108PWR: 8-bit bi-directional voltage level shifter with a smaller package (TSSOP-20).
3. PCA9306DCUR: Dual bidirectional I2C-bus and SMBus voltage-level translator with a different pin configuration (VSSOP-8).

These alternative models offer similar functionality to the CLVC16244AIDGGREP and can be considered based on specific application requirements.

Word count: 511