CD74HC4016M96

Product Overview

• Category: Integrated Circuit (IC)
• Use: Analog Switch
• Characteristics: High-Speed CMOS Logic, Quad Bilateral Switch
• Package: SOIC-14
• Essence: The CD74HC4016M96 is a quad bilateral switch IC that allows for the routing of analog or digital signals. It is commonly used in applications where multiple signals need to be switched or multiplexed.
• Packaging/Quantity: The CD74HC4016M96 is typically sold in reels containing 2500 units.

Specifications

• Supply Voltage: 2V to 6V
• Input Voltage Range: -0.5V to VCC + 0.5V
• On-State Resistance: 70 Ohms (typical)
• Operating Temperature Range: -40°C to 85°C
• Propagation Delay Time: 13 ns (typical)

Pin Configuration

The CD74HC4016M96 has a total of 14 pins arranged as follows:

__ __ 1 | 1 \/ 14 | VCC 2 | 2 13 | IN1 3 | 3 12 | IN2 4 | 4 11 | IN3 5 | 5 10 | IN4 GND | 6 9 | OUT4 NC | 7 8 | OUT3 ----------

Functional Features

• Quad bilateral switch with independent control of each switch
• Low power consumption
• High-speed switching capability
• Wide operating voltage range
• Break-before-make switching action

Advantages and Disadvantages

Advantages: - Independent control of each switch allows for flexible signal routing - Low power consumption makes it suitable for battery-powered applications - High-speed switching capability enables fast signal processing

Disadvantages: - Limited on-state resistance may introduce some signal attenuation - Break-before-make switching action may cause momentary signal interruption during switching

Working Principles

The CD74HC4016M96 operates based on the principles of CMOS logic. It consists of four independent bilateral switches, each controlled by a separate input signal. When the control signal is high, the corresponding switch is closed, allowing the passage of signals between the input and output terminals. Conversely, when the control signal is low, the switch is open, isolating the input and output terminals.

Detailed Application Field Plans

The CD74HC4016M96 finds applications in various fields, including:

1. Audio and Video Signal Routing: The quad bilateral switch can be used to route audio and video signals in multimedia systems, allowing for seamless switching between different sources.
2. Data Multiplexing: In digital communication systems, the IC can be employed to multiplex multiple data streams onto a single transmission line, optimizing bandwidth utilization.
3. Test and Measurement Equipment: The CD74HC4016M96 is commonly used in test and measurement equipment to facilitate signal routing and switching during testing procedures.
4. Industrial Control Systems: The IC can be utilized in industrial control systems to enable the selection of different sensors or actuators based on specific control requirements.

Detailed and Complete Alternative Models

1. CD4066BM96: Quad Bilateral Switch IC with similar characteristics and pin configuration.
2. DG403DJZ: Analog Switch IC with comparable specifications and package type.
3. MAX4617CSE+: High-Speed CMOS Analog Switch IC offering enhanced performance.

These alternative models provide similar functionality and can be considered as substitutes for the CD74HC4016M96 in various applications.

Word count: 446 words