CD4052BPWR

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Analog Multiplexer/Demultiplexer
• Characteristics: Low power consumption, high speed, wide voltage range
• Package: TSSOP (Thin Shrink Small Outline Package)
• Essence: CMOS analog multiplexer/demultiplexer
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage Range: 3V to 18V
• On-State Resistance: 80Ω (typical)
• On-State Resistance Flatness: 5Ω (typical)
• Channel-to-Channel Crosstalk: -60dB (typical)
• Operating Temperature Range: -55°C to +125°C

Detailed Pin Configuration

The CD4052BPWR has a total of 16 pins. The pin configuration is as follows:

1. INHIBIT (INH)
2. SELECT (SEL)
3. COMMON (COM)
4. CHANNEL 1 (CH1)
5. CHANNEL 2 (CH2)
6. VEE (Negative Supply Voltage)
7. VSS (Ground)
8. CHANNEL 3 (CH3)
9. CHANNEL 4 (CH4)
10. VDD (Positive Supply Voltage)
11. CHANNEL 5 (CH5)
12. CHANNEL 6 (CH6)
13. CHANNEL 7 (CH7)
14. CHANNEL 8 (CH8)
15. VEE (Negative Supply Voltage)
16. VDD (Positive Supply Voltage)

Functional Features

• Wide voltage range allows compatibility with various systems
• Low power consumption for energy-efficient operation
• High-speed switching capability for rapid signal routing
• CMOS technology ensures low noise and distortion
• Built-in protection against latch-up and electrostatic discharge

Advantages and Disadvantages

Advantages

• Versatile analog multiplexer/demultiplexer for various applications
• Low power consumption extends battery life in portable devices
• High-speed switching enables efficient signal routing
• Wide voltage range provides flexibility in system design

Disadvantages

• Limited number of channels (8 channels)
• On-state resistance may introduce slight signal attenuation
• Not suitable for high-frequency applications due to limited bandwidth

Working Principles

The CD4052BPWR is a CMOS analog multiplexer/demultiplexer. It uses a combination of MOSFET switches to route analog signals between multiple input channels and a common output channel. The control pins (INHIBIT and SELECT) determine which input channel is connected to the output. When the appropriate control signals are applied, the corresponding switch is turned on, allowing the selected input signal to pass through to the output.

Detailed Application Field Plans

The CD4052BPWR can be used in various applications, including: 1. Audio and video signal routing in multimedia systems 2. Data acquisition systems for selecting different sensor inputs 3. Communication systems for channel selection and switching 4. Test and measurement equipment for signal routing and switching 5. Industrial control systems for multiplexing analog signals

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the CD4052BPWR include: 1. CD4051BPWR: 8-channel analog multiplexer/demultiplexer with similar specifications 2. CD4053BPWR: Triple 2-channel analog multiplexer/demultiplexer with similar characteristics 3. CD4067BPWR: 16-channel analog multiplexer/demultiplexer with expanded channel capacity

Note: These alternative models may have slightly different pin configurations and package options, so careful consideration should be given to ensure compatibility with the specific application requirements.

This entry provides an overview of the CD4052BPWR, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.