Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
AVC8T245PWR-D
Lihat Detail Lembar Data

AVC8T245PWR-D

Product Overview

Category: Integrated Circuit (IC)

Use: The AVC8T245PWR-D is a high-speed octal bus transceiver designed for bidirectional data communication between two independent buses. It can be used in various applications where data needs to be transferred between different systems or components.

Characteristics: - High-speed operation - Bidirectional data flow - Eight channels for parallel data transfer - Low power consumption - Wide operating voltage range

Package: The AVC8T245PWR-D is available in a small form factor package, which allows for easy integration into electronic devices and systems. The package type is TSSOP (Thin Shrink Small Outline Package).

Essence: The essence of the AVC8T245PWR-D is its ability to facilitate efficient and reliable data transfer between two independent buses, enabling seamless communication between different parts of a system.

Packaging/Quantity: The AVC8T245PWR-D is typically sold in reels containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer and distributor.

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 400 Mbps
  • Number of Channels: 8
  • Input/Output Compatibility: CMOS/TTL

Pin Configuration

The AVC8T245PWR-D has a total of 20 pins, each serving a specific function. The pin configuration is as follows:

  1. OE (Output Enable) 1
  2. A1 (Address Input) 1
  3. B1 (Data Bus) 1
  4. B2 (Data Bus) 2
  5. GND (Ground)
  6. B3 (Data Bus) 3
  7. B4 (Data Bus) 4
  8. VCC (Supply Voltage)
  9. A2 (Address Input) 2
  10. OE (Output Enable) 2
  11. B5 (Data Bus) 5
  12. B6 (Data Bus) 6
  13. B7 (Data Bus) 7
  14. B8 (Data Bus) 8
  15. DIR (Direction Control)
  16. GND (Ground)
  17. A3 (Address Input) 3
  18. A4 (Address Input) 4
  19. B1 (Data Bus) 1
  20. VCC (Supply Voltage)

Functional Features

  • Bidirectional data transfer between two independent buses
  • High-speed operation for efficient data communication
  • Output enable control for selective data transmission
  • Direction control for controlling the flow of data
  • Wide operating voltage range for compatibility with different systems

Advantages and Disadvantages

Advantages: - High-speed operation allows for fast data transfer - Bidirectional communication enables versatile use in various applications - Low power consumption for energy-efficient operation - Small form factor package facilitates easy integration into electronic devices

Disadvantages: - Limited number of channels may not be suitable for applications requiring a higher number of parallel data transfers - Temperature limitations restrict usage in extreme temperature environments

Working Principles

The AVC8T245PWR-D operates by receiving data from one bus and transmitting it to another, or vice versa. The direction of data flow is controlled by the DIR pin. When the DIR pin is set to a specific logic level, the data is either transmitted or received. The output enable (OE) pin can be used to enable or disable the data transmission.

Detailed Application Field Plans

The AVC8T245PWR-D can be applied in various fields where data communication between independent buses is required. Some potential application areas include: - Industrial automation systems - Automotive electronics - Communication equipment - Computer peripherals - Consumer electronics

Detailed and Complete Alternative Models

  • SN74LV245APWR
  • MC74LVX245DTR2G
  • 74LVC245AD,118
  • CD74HCT245M96
  • 74HC245PW,118

These alternative models offer similar functionality to the AVC8T245PWR-D and can be considered as alternatives based on specific requirements and availability.

Word count: 536 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan AVC8T245PWR-D dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of AVC8T245PWR-D in technical solutions:

  1. Q: What is AVC8T245PWR-D? A: AVC8T245PWR-D is a specific model of octal bus transceiver with 3-state outputs, designed for bidirectional data communication between different voltage levels.

  2. Q: What is the operating voltage range of AVC8T245PWR-D? A: The operating voltage range of AVC8T245PWR-D is typically from 1.65V to 5.5V.

  3. Q: How many channels does AVC8T245PWR-D have? A: AVC8T245PWR-D has 8 channels, allowing bidirectional data transfer on each channel.

  4. Q: What is the maximum data transfer rate supported by AVC8T245PWR-D? A: AVC8T245PWR-D supports a maximum data transfer rate of up to 100 Mbps.

  5. Q: Can AVC8T245PWR-D be used for level shifting between different voltage domains? A: Yes, AVC8T245PWR-D can be used for level shifting as it supports bidirectional communication between different voltage levels.

  6. Q: Does AVC8T245PWR-D have built-in ESD protection? A: Yes, AVC8T245PWR-D has built-in ESD protection, which helps protect the device from electrostatic discharge.

  7. Q: Can AVC8T245PWR-D be used in industrial applications? A: Yes, AVC8T245PWR-D is suitable for industrial applications as it operates over a wide temperature range and has robust features.

  8. Q: What is the power supply voltage required for AVC8T245PWR-D? A: AVC8T245PWR-D requires a power supply voltage of typically 1.65V to 5.5V.

  9. Q: Does AVC8T245PWR-D support hot-swapping of devices? A: Yes, AVC8T245PWR-D supports hot-swapping, allowing devices to be connected or disconnected while the system is powered on.

  10. Q: Can AVC8T245PWR-D be used in automotive applications? A: Yes, AVC8T245PWR-D is suitable for automotive applications as it meets the required standards and has features like ESD protection and wide temperature range.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.