STMicroelectronics
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
VN5E160MS-E
Lihat Detail Lembar Data

VN5E160MS-E

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - High voltage capability - Low quiescent current - Wide input voltage range - Overtemperature protection - Short-circuit protection - Thermal shutdown

Package: SOIC-8

Essence: VN5E160MS-E is a power management IC designed for various applications requiring high voltage capability and low quiescent current.

Packaging/Quantity: The VN5E160MS-E is available in a standard SOIC-8 package. It is typically sold in reels of 2500 units.

Specifications

  • Input Voltage Range: 4.5V to 36V
  • Output Voltage Range: 1.2V to 35V
  • Maximum Continuous Output Current: 1.5A
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The VN5E160MS-E has the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | IN | Input voltage pin | | 2 | GND | Ground pin | | 3 | EN | Enable pin | | 4 | FB | Feedback pin | | 5 | SS | Soft-start pin | | 6 | VCC | Supply voltage pin | | 7 | PG | Power good pin | | 8 | OUT | Output voltage pin |

Functional Features

  • High voltage capability allows it to handle a wide range of input voltages.
  • Low quiescent current ensures minimal power consumption during standby or idle mode.
  • Overtemperature protection prevents damage due to excessive heat.
  • Short-circuit protection safeguards the IC and connected components from damage in case of a short circuit.
  • Thermal shutdown feature shuts down the IC when the temperature exceeds the safe operating limit.

Advantages and Disadvantages

Advantages: - Wide input voltage range makes it suitable for various applications. - Low quiescent current helps conserve power and extend battery life. - Overtemperature and short-circuit protection enhance reliability and safety.

Disadvantages: - Limited maximum continuous output current may restrict its use in high-power applications. - The SOIC-8 package may not be suitable for all PCB layouts.

Working Principles

The VN5E160MS-E is based on a switching regulator topology. It utilizes a control circuit to regulate the output voltage based on the feedback received from the FB pin. The enable (EN) pin allows the user to turn the IC on or off. The soft-start (SS) pin provides a controlled startup sequence, reducing inrush current during power-up.

Detailed Application Field Plans

The VN5E160MS-E is commonly used in the following applications:

  1. Automotive electronics: Power management for automotive systems such as infotainment systems, lighting, and motor control.
  2. Industrial automation: Control and regulation of motors, actuators, and sensors in industrial machinery.
  3. Telecommunications: Power supply for communication equipment, routers, and switches.
  4. Consumer electronics: Voltage regulation for portable devices, home appliances, and audio/video equipment.

Detailed and Complete Alternative Models

  1. VN5E150MS-E: Similar to VN5E160MS-E but with a lower maximum continuous output current of 1A.
  2. VN5E100MS-E: Lower voltage capability but higher maximum continuous output current of 2A.
  3. VN5E050MS-E: Lower voltage capability and maximum continuous output current of 500mA.

These alternative models provide options based on specific requirements for voltage range and output current.

Word count: 511 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan VN5E160MS-E dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of VN5E160MS-E in technical solutions:

  1. Question: What is the VN5E160MS-E?
    Answer: The VN5E160MS-E is a power switch IC designed for automotive applications, specifically for driving resistive, inductive, and capacitive loads.

  2. Question: What is the maximum voltage rating of the VN5E160MS-E?
    Answer: The VN5E160MS-E has a maximum voltage rating of 60V.

  3. Question: What is the maximum current rating of the VN5E160MS-E?
    Answer: The VN5E160MS-E has a maximum current rating of 16A.

  4. Question: Can the VN5E160MS-E be used for both AC and DC loads?
    Answer: Yes, the VN5E160MS-E can be used for both AC and DC loads.

  5. Question: Is the VN5E160MS-E suitable for automotive applications?
    Answer: Yes, the VN5E160MS-E is specifically designed for automotive applications and meets the required standards.

  6. Question: Does the VN5E160MS-E have built-in protection features?
    Answer: Yes, the VN5E160MS-E includes various protection features such as over-temperature, over-current, and short-circuit protection.

  7. Question: What is the typical on-resistance of the VN5E160MS-E?
    Answer: The typical on-resistance of the VN5E160MS-E is around 40mΩ.

  8. Question: Can the VN5E160MS-E be controlled using a microcontroller?
    Answer: Yes, the VN5E160MS-E can be easily controlled using a microcontroller through its input pins.

  9. Question: Is the VN5E160MS-E available in different package options?
    Answer: Yes, the VN5E160MS-E is available in a variety of package options, including PowerSSO-12 and DPAK.

  10. Question: Can the VN5E160MS-E be used in high-temperature environments?
    Answer: Yes, the VN5E160MS-E has a wide operating temperature range and can be used in high-temperature environments typically found in automotive applications.

Please note that these answers are general and may vary depending on the specific application and requirements.