STMicroelectronics
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
TN5050H-12WY
Lihat Detail Lembar Data

TN5050H-12WY Product Overview

Introduction

The TN5050H-12WY is a versatile electronic component designed for use in various applications. This entry provides an in-depth overview of the product, including its category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: The TN5050H-12WY is used in electronic circuits for controlling power supply and switching applications.
  • Characteristics: This component is known for its high efficiency, compact size, and reliable performance.
  • Package: The TN5050H-12WY is available in a compact package suitable for surface mount applications.
  • Essence: The essence of this component lies in its ability to provide precise control over power management in electronic devices.
  • Packaging/Quantity: The TN5050H-12WY is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Input Voltage: 12V
  • Output Current: 5A
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: TO-220
  • Switching Frequency: 500kHz

Detailed Pin Configuration

The TN5050H-12WY features a standard pin configuration with detailed specifications for each pin: 1. Pin 1: Input Voltage (VIN) 2. Pin 2: Ground (GND) 3. Pin 3: Output Voltage (VOUT)

Functional Features

  • High Efficiency: The TN5050H-12WY offers high efficiency, minimizing power loss in electronic circuits.
  • Overcurrent Protection: This component includes built-in overcurrent protection to safeguard connected devices.
  • Fast Switching Speed: With a high switching frequency, the TN5050H-12WY enables rapid power control.

Advantages and Disadvantages

Advantages

  • Compact Size
  • High Efficiency
  • Overcurrent Protection
  • Wide Operating Temperature Range

Disadvantages

  • Limited Output Current Capacity
  • Requires Heat Sink for High Power Applications

Working Principles

The TN5050H-12WY operates based on pulse width modulation (PWM) principles, regulating the output voltage by controlling the duty cycle of the input signal. By rapidly switching the output, it effectively manages power delivery to the connected load.

Detailed Application Field Plans

The TN5050H-12WY is commonly used in the following applications: - LED Lighting Systems - DC-DC Converters - Motor Control Circuits - Battery Charging Systems

Detailed and Complete Alternative Models

For users seeking alternative options, the following models can be considered: - TN5050H-10WY: Similar specifications with lower output current capacity - TN5050H-15WY: Higher output current capacity with comparable characteristics

In conclusion, the TN5050H-12WY serves as a reliable and efficient electronic component suitable for a wide range of power management applications.

Word Count: 472

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan TN5050H-12WY dalam solusi teknis

  1. What is the input voltage range for TN5050H-12WY?

    • The input voltage range for TN5050H-12WY is typically 100-240V AC.

  2. What is the maximum output power of TN5050H-12WY?

    • TN5050H-12WY has a maximum output power of 12W.

  3. Is TN5050H-12WY suitable for outdoor applications?

    • Yes, TN5050H-12WY is designed to be suitable for outdoor applications with its IP65 rating for water and dust resistance.

  4. Can TN5050H-12WY be dimmed?

    • Yes, TN5050H-12WY can be dimmed using compatible dimming systems.

  5. What is the typical efficiency of TN5050H-12WY?

    • The typical efficiency of TN5050H-12WY is around 85-90%.

  6. Does TN5050H-12WY have overcurrent protection?

    • Yes, TN5050H-12WY is equipped with overcurrent protection to ensure safe operation.

  7. What is the operating temperature range for TN5050H-12WY?

    • TN5050H-12WY has an operating temperature range of -20°C to 50°C.

  8. Is TN5050H-12WY compatible with smart control systems?

    • Yes, TN5050H-12WY is compatible with various smart control systems for advanced lighting solutions.

  9. Does TN5050H-12WY require a separate heat sink for thermal management?

    • TN5050H-12WY is designed with built-in thermal management to handle heat dissipation effectively without requiring a separate heat sink.

  10. What type of load is TN5050H-12WY suitable for?

    • TN5050H-12WY is suitable for driving LED loads such as LED strips, panels, and other LED lighting fixtures.