STMicroelectronics
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
STPS60SM200CW
Lihat Detail Lembar Data

STPS60SM200CW

Introduction

The STPS60SM200CW is a high-performance Schottky rectifier designed for use in various electronic applications. This entry provides an overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Overview

  • Category: Semiconductor/Electronic Component
  • Use: Rectification in power supply circuits, voltage clamping, freewheeling diode in inductive load applications
  • Characteristics: High efficiency, low forward voltage drop, fast switching, high current capability
  • Package: TO-220AC
  • Essence: High-performance Schottky rectifier
  • Packaging/Quantity: Tape and reel, 50 units per reel

Specifications

  • Voltage Rating: 200V
  • Average Forward Current: 60A
  • Peak Non-Repetitive Surge Current: 300A
  • Operating Temperature Range: -65°C to +175°C
  • Storage Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The STPS60SM200CW follows the standard pin configuration for the TO-220AC package: 1. Anode 2. Cathode

Functional Features

  • Low forward voltage drop
  • High-frequency operation capability
  • Excellent thermal performance
  • Avalanche capability for unclamped inductive load (UIL) protection

Advantages

  • High efficiency
  • Fast switching speed
  • Suitable for high-frequency applications
  • Enhanced thermal management

Disadvantages

  • Relatively higher cost compared to standard rectifiers
  • Limited availability from certain suppliers

Working Principles

The STPS60SM200CW operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes. This enables efficient rectification and voltage clamping in various electronic circuits.

Detailed Application Field Plans

The STPS60SM200CW is widely used in the following applications: - Switched-mode power supplies - DC-DC converters - Motor drive circuits - Solar inverters - Uninterruptible power supplies (UPS) - Power factor correction circuits

Detailed and Complete Alternative Models

Some alternative models to the STPS60SM200CW include: - STPS60L45CW: 45V, 60A Schottky rectifier - STPS60H100CW: 100V, 60A Schottky rectifier - STPS60M80CW: 80V, 60A Schottky rectifier

In conclusion, the STPS60SM200CW is a high-performance Schottky rectifier with versatile applications in power electronics and related fields. Its advanced characteristics and robust design make it a preferred choice for demanding electronic circuits.

Word Count: 409

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan STPS60SM200CW dalam solusi teknis

  1. What is the maximum voltage rating of STPS60SM200CW?

    • The maximum voltage rating of STPS60SM200CW is 200V.

  2. What is the maximum current rating of STPS60SM200CW?

    • The maximum current rating of STPS60SM200CW is 60A.

  3. What is the forward voltage drop of STPS60SM200CW at its rated current?

    • The forward voltage drop of STPS60SM200CW at its rated current is typically around 0.75V.

  4. What is the reverse recovery time of STPS60SM200CW?

    • The reverse recovery time of STPS60SM200CW is typically around 35ns.

  5. What are the typical applications for STPS60SM200CW?

    • STPS60SM200CW is commonly used in power supplies, LED lighting, motor control, and automotive systems.

  6. Is STPS60SM200CW suitable for high-frequency switching applications?

    • Yes, STPS60SM200CW is designed for high-frequency switching applications.

  7. Does STPS60SM200CW have built-in thermal protection?

    • Yes, STPS60SM200CW features built-in thermal protection to safeguard against overheating.

  8. What is the operating temperature range of STPS60SM200CW?

    • The operating temperature range of STPS60SM200CW is -65°C to 175°C.

  9. Can STPS60SM200CW be used in parallel to handle higher currents?

    • Yes, STPS60SM200CW can be used in parallel to handle higher currents effectively.

  10. Are there any recommended layout considerations for using STPS60SM200CW in a circuit?

    • It is recommended to minimize loop area and provide adequate thermal management for optimal performance when using STPS60SM200CW in a circuit.