Lihat spesifikasi untuk detail produk.
STPS2H100U
Introduction
The STPS2H100U is a high-performance Schottky rectifier diode designed for use in various electronic applications. This entry provides an overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Product Overview
- Category: Semiconductor/Electronic Component
- Use: Rectification in power supply circuits, voltage clamping, freewheeling diode in inductive load applications
- Characteristics: High efficiency, low forward voltage drop, fast switching speed
- Package: TO-220AC
- Essence: Schottky rectifier diode
- Packaging/Quantity: Tape & Reel, 50 pieces per reel
Specifications
- Voltage Rating: 100V
- Current Rating: 2A
- Forward Voltage Drop: 0.55V at 1A
- Reverse Leakage Current: 10μA at 80V
- Operating Temperature Range: -65°C to 175°C
Detailed Pin Configuration
The STPS2H100U follows the standard TO-220AC pin configuration: - Pin 1: Anode - Pin 2: Cathode
Functional Features
- Low forward voltage drop ensures minimal power dissipation
- Fast switching speed allows for efficient operation in high-frequency circuits
- High current capability enables use in power supply and motor drive applications
Advantages and Disadvantages
Advantages
- High efficiency
- Low power dissipation
- Fast response time
Disadvantages
- Limited reverse voltage rating compared to some other diode types
- Sensitive to temperature variations
Working Principles
The STPS2H100U operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes.
Detailed Application Field Plans
The STPS2H100U is suitable for various applications, including: - Switching power supplies - Voltage clamping circuits - Freewheeling diode in motor drive applications - Solar panel bypass diode
Detailed and Complete Alternative Models
- STPS2L25U: 25V, 2A Schottky rectifier diode
- STPS20M100S: 100V, 20A Schottky rectifier diode
- STPS30L60CT: 60V, 30A Schottky rectifier diode
In conclusion, the STPS2H100U is a high-performance Schottky rectifier diode with excellent efficiency, fast switching speed, and versatile applications across various electronic circuits.
Word Count: 394
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan STPS2H100U dalam solusi teknis
What is the STPS2H100U?
- The STPS2H100U is a dual Schottky rectifier designed for high frequency applications.
What are the key features of the STPS2H100U?
- The key features include low forward voltage drop, high frequency operation, and high junction temperature capability.
What are the typical applications of the STPS2H100U?
- Typical applications include switch mode power supplies, freewheeling diodes, and polarity protection.
What is the maximum forward voltage of the STPS2H100U?
- The maximum forward voltage is typically around 0.55V at 5A.
What is the reverse recovery time of the STPS2H100U?
- The reverse recovery time is typically around 20ns.
What is the maximum junction temperature of the STPS2H100U?
- The maximum junction temperature is 150°C.
What is the package type of the STPS2H100U?
- The package type is D²PAK (TO-263).
What are the recommended operating conditions for the STPS2H100U?
- The recommended operating conditions include a maximum average forward current of 2x5A, and a maximum repetitive peak reverse voltage of 100V.
What are the storage conditions for the STPS2H100U?
- The storage conditions include a temperature range of -65°C to 175°C.
Are there any specific layout considerations for using the STPS2H100U in a circuit?
- Yes, it's important to minimize the length and area of high current loops to optimize performance.
Please let me know if you need further information on any of these questions!