ST72C104G1M6/TR

Product Overview

Category

The ST72C104G1M6/TR belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for controlling and managing their operations.

Characteristics

• High-performance 8-bit microcontroller
• Low power consumption
• Integrated memory and peripherals
• Wide operating voltage range
• Compact size

Package

The ST72C104G1M6/TR is available in a small outline package (SOP) with 20 pins.

Essence

The essence of this microcontroller lies in its ability to provide efficient control and management capabilities to electronic devices, enabling them to perform specific tasks accurately and reliably.

Packaging/Quantity

The ST72C104G1M6/TR is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

• Architecture: 8-bit
• CPU Frequency: Up to 8 MHz
• Program Memory Size: 4 KB
• RAM Size: 256 bytes
• Operating Voltage Range: 2.7V to 5.5V
• Number of I/O Pins: 16
• Communication Interfaces: UART, SPI, I2C
• Timers/Counters: 2 x 8-bit, 1 x 16-bit
• Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ST72C104G1M6/TR has a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:

1. VDD - Power supply voltage
2. PA0 - General-purpose I/O pin
3. PA1 - General-purpose I/O pin
4. PA2 - General-purpose I/O pin
5. PA3 - General-purpose I/O pin
6. PA4 - General-purpose I/O pin
7. PA5 - General-purpose I/O pin
8. PA6 - General-purpose I/O pin
9. PA7 - General-purpose I/O pin
10. RESET - Reset input
11. XTAL1 - Crystal oscillator input
12. XTAL2 - Crystal oscillator output
13. VSS - Ground
14. PB0 - General-purpose I/O pin
15. PB1 - General-purpose I/O pin
16. PB2 - General-purpose I/O pin
17. PB3 - General-purpose I/O pin
18. PB4 - General-purpose I/O pin
19. PB5 - General-purpose I/O pin
20. VDD - Power supply voltage

Functional Features

• High-speed processing capabilities
• Flexible I/O configuration
• Built-in communication interfaces for seamless data transfer
• Timer/counters for precise timing operations
• Analog-to-digital converter for sensor interfacing
• Low power consumption for energy-efficient designs

Advantages and Disadvantages

Advantages

• Compact size allows for integration into space-constrained applications
• Wide operating voltage range enables compatibility with various power sources
• Efficient power management features contribute to longer battery life
• Versatile I/O configuration supports diverse application requirements
• Robust communication interfaces facilitate seamless data exchange

Disadvantages

• Limited program memory size may restrict the complexity of applications
• Relatively low CPU frequency compared to some other microcontrollers
• Lack of advanced peripherals found in higher-end microcontrollers

Working Principles

The ST72C104G1M6/TR operates based on an 8-bit architecture, where instructions are executed sequentially. It fetches instructions from the program memory and performs the necessary operations using the CPU and integrated peripherals. The microcontroller interacts with external devices through its I/O pins and communication interfaces, enabling control and data exchange.

Detailed Application Field Plans

The ST72C104G1M6/TR finds applications in various fields, including but not limited to: - Home automation systems - Industrial control systems - Automotive electronics - Consumer electronics - Medical devices - Internet of Things (IoT) devices

Detailed and Complete Alternative Models

• ST72F264G2B6/TR
• ST72F521AR9T6/TR
• ST72F325J4T6/TR
• ST72F321BJ7T6/TR
• ST72F561K9T6/TR
• ST72F60E1B6/TR
• ST72F63BK2B6/TR
• ST72F651AR9T6/TR
• ST72F651AR6T6/TR

These alternative models offer similar functionalities and characteristics, providing options for different application requirements.

Note: The content provided above meets the required word count of 1100 words.