MC4558ID

Product Overview

Category: Integrated Circuit (IC)
Use: Operational Amplifier
Characteristics: Dual, Low Power, High Slew Rate
Package: DIP-8 (Dual Inline Package with 8 pins)
Essence: The MC4558ID is a dual operational amplifier designed for general-purpose applications.
Packaging/Quantity: Available in tubes or reels, with a quantity of 50 units per tube/reel.

Specifications

Supply Voltage: ±2V to ±18V
Input Offset Voltage: 1.5mV (maximum)
Input Bias Current: 30nA (maximum)
Slew Rate: 3.5V/µs (typical)
Gain Bandwidth Product: 3MHz (typical)
Input Common Mode Range: ±12V
Output Voltage Swing: ±12V

Pin Configuration

The MC4558ID has a DIP-8 package with the following pin configuration:

___________ Vcc | 1 8 | Vout Vin-| 2 7 | Vin+ NC | 3 6 | NC Gnd | 4 5 | NC -----------

Functional Features

Dual operational amplifier in a single package
Low power consumption
High slew rate for fast signal amplification
Wide input common mode range
Suitable for general-purpose applications

Advantages and Disadvantages

Advantages: - Compact design with two amplifiers in one package - Low power consumption extends battery life - High slew rate allows for accurate amplification of fast signals - Wide input common mode range provides flexibility in various applications

Disadvantages: - Limited bandwidth compared to specialized operational amplifiers - Higher input offset voltage compared to precision amplifiers

Working Principles

The MC4558ID is based on the operational amplifier (op-amp) circuitry. It consists of two amplifiers in a single package, allowing for dual-channel applications. The op-amp amplifies the difference between the input voltages and provides an output voltage proportional to this difference. It operates with a wide range of supply voltages and offers low power consumption.

Detailed Application Field Plans

The MC4558ID can be used in various applications, including but not limited to: 1. Audio amplification circuits 2. Signal conditioning circuits 3. Active filters 4. Voltage followers 5. Instrumentation amplifiers

Alternative Models

Here are some alternative models that can be considered as alternatives to the MC4558ID:

LM358: Dual operational amplifier with similar characteristics.
TL072: Low noise, high-speed dual operational amplifier.
NE5532: High-performance audio operational amplifier.

These alternative models offer different features and specifications, providing options based on specific application requirements.

In conclusion, the MC4558ID is a versatile dual operational amplifier suitable for general-purpose applications. Its compact design, low power consumption, and high slew rate make it a popular choice in various electronic circuits. However, it is important to consider alternative models based on specific application needs.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MC4558ID dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of MC4558ID in technical solutions:

Q: What is MC4558ID? A: MC4558ID is a dual operational amplifier (op-amp) integrated circuit commonly used in various electronic applications.
Q: What are the key features of MC4558ID? A: MC4558ID features low input bias current, high slew rate, wide bandwidth, and low noise, making it suitable for precision signal amplification and filtering.
Q: How can I use MC4558ID as a voltage amplifier? A: Connect the input signal to one of the op-amp's inputs, and provide a feedback resistor between the output and the other input. This configuration amplifies the input voltage.
Q: Can MC4558ID be used as a comparator? A: Yes, MC4558ID can be used as a comparator by configuring one input as a reference voltage and the other input as the signal to be compared.
Q: What is the power supply voltage range for MC4558ID? A: MC4558ID typically operates with a power supply voltage range of ±4V to ±18V.
Q: Can MC4558ID drive capacitive loads? A: Yes, MC4558ID has a high output current capability, allowing it to drive capacitive loads up to a certain limit.
Q: Is MC4558ID suitable for audio applications? A: Yes, MC4558ID is commonly used in audio applications such as preamplifiers, tone control circuits, and audio mixers.
Q: Can MC4558ID be used in active filter designs? A: Absolutely, MC4558ID is well-suited for active filter designs due to its wide bandwidth and low noise characteristics.
Q: What is the temperature range for MC4558ID? A: MC4558ID typically operates within a temperature range of -40°C to +85°C.
Q: Are there any recommended application circuits available for MC4558ID? A: Yes, the datasheet for MC4558ID provides various application circuits and example designs that can be used as a reference for different technical solutions.

Please note that these answers are general and may vary depending on specific design requirements and application scenarios.