STMicroelectronics
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
L5991D013TR
Lihat Detail Lembar Data

L5991D013TR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, low power consumption
  • Package: DFN-8 (Dual Flat No-Lead)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Voltage Range: 1.2V to 37V
  • Output Current: Up to 1.5A
  • Quiescent Current: 50µA
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The L5991D013TR IC has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for output voltage regulation
  4. COMP: Compensation pin for stability control
  5. EN: Enable pin for turning the regulator on/off
  6. VOUT: Output voltage pin
  7. SW: Switching pin for controlling the internal power switch
  8. PGND: Power ground pin

Functional Features

  • Wide input voltage range allows for versatile applications
  • High efficiency ensures minimal power loss
  • Low quiescent current enables energy-saving operation
  • Built-in protection features such as overvoltage and thermal shutdown
  • Adjustable output voltage for flexibility in different applications

Advantages and Disadvantages

Advantages

  • High efficiency results in reduced power consumption
  • Wide input voltage range accommodates various power sources
  • Compact DFN-8 package saves board space
  • Built-in protection features enhance system reliability

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Requires external components for proper operation

Working Principles

The L5991D013TR is a voltage regulator IC that utilizes a switching regulator topology to efficiently convert the input voltage to a regulated output voltage. It employs a pulse width modulation (PWM) control scheme to adjust the duty cycle of the internal power switch, thereby regulating the output voltage. The feedback pin (FB) monitors the output voltage and provides a control signal to the internal circuitry for precise regulation.

Detailed Application Field Plans

The L5991D013TR is commonly used in various applications, including:

  1. Power supplies for industrial equipment
  2. Automotive electronics
  3. Battery-powered devices
  4. LED lighting systems
  5. Telecom infrastructure

Detailed and Complete Alternative Models

  1. L5991A013TR: Similar specifications, but with lower quiescent current
  2. L5991B013TR: Higher output current capability, suitable for more demanding applications
  3. L5991C013TR: Enhanced protection features, including overcurrent and reverse polarity protection

These alternative models provide options based on specific requirements and constraints.

Word count: 314 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan L5991D013TR dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of L5991D013TR in technical solutions:

Q1: What is L5991D013TR? A1: L5991D013TR is a specific model of integrated circuit (IC) used for power management applications.

Q2: What are the typical applications of L5991D013TR? A2: L5991D013TR is commonly used in various technical solutions such as battery chargers, power supplies, and LED drivers.

Q3: What is the input voltage range of L5991D013TR? A3: The input voltage range of L5991D013TR is typically between 4.5V and 60V.

Q4: What is the output current capability of L5991D013TR? A4: L5991D013TR can provide an output current of up to 1.5A.

Q5: Does L5991D013TR have built-in protection features? A5: Yes, L5991D013TR includes various protection features such as overvoltage protection, overcurrent protection, and thermal shutdown.

Q6: Can L5991D013TR operate in a wide temperature range? A6: Yes, L5991D013TR is designed to operate in a wide temperature range, typically from -40°C to 150°C.

Q7: Is L5991D013TR compatible with both analog and digital control systems? A7: Yes, L5991D013TR supports both analog and digital control systems, providing flexibility in design.

Q8: What is the efficiency of L5991D013TR? A8: L5991D013TR has high efficiency due to its low quiescent current and optimized power conversion algorithms.

Q9: Can L5991D013TR be used in automotive applications? A9: Yes, L5991D013TR is suitable for automotive applications as it meets the necessary standards and requirements.

Q10: Are there any evaluation boards or reference designs available for L5991D013TR? A10: Yes, the manufacturer of L5991D013TR provides evaluation boards and reference designs to assist in the development process.