STMicroelectronics
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
ESDA8V2-1J
Lihat Detail Lembar Data

ESDA8V2-1J

Product Overview

The ESDA8V2-1J belongs to the category of transient voltage suppressor (TVS) diodes and is used for protecting sensitive electronic components from voltage transients. These diodes are characterized by their high surge capability, low clamping voltage, and fast response time. The package type for ESDA8V2-1J is SOT-23, and it is available in tape and reel packaging with a quantity of 3000 units per reel.

Specifications

  • Voltage Rating: 8.2V
  • Peak Pulse Current: 5A
  • Clamping Voltage: 14V
  • Package Type: SOT-23
  • Packaging: Tape and Reel
  • Quantity: 3000 units per reel

Detailed Pin Configuration

The ESDA8V2-1J has three pins: anode, cathode, and ground. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode - Pin 3: Ground

Functional Features

  • High surge capability
  • Low clamping voltage
  • Fast response time
  • ESD protection up to ±30 kV contact discharge (IEC 61000-4-2)

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time ensures minimal impact on the protected circuit
  • High surge capability for robust performance

Disadvantages

  • Clamping voltage may be relatively higher compared to some alternative models
  • Sensitive to reverse bias conditions

Working Principles

The ESDA8V2-1J operates based on the principle of avalanche breakdown. When a transient voltage spike occurs, the diode rapidly conducts, diverting the excess current away from the sensitive components. This action effectively clamps the voltage to a safe level, protecting the downstream circuitry.

Detailed Application Field Plans

The ESDA8V2-1J is widely used in various applications including: - Consumer electronics - Telecommunication equipment - Industrial control systems - Automotive electronics - Medical devices

Detailed and Complete Alternative Models

Some alternative models to ESDA8V2-1J include: - ESD9B5.0ST5G - PESD5V0L1BA - SMAJ8.0A

In conclusion, the ESDA8V2-1J transient voltage suppressor diode offers effective protection against voltage transients with its high surge capability, low clamping voltage, and fast response time. While it has certain disadvantages, its working principles and wide application field plans make it a valuable component in safeguarding sensitive electronic circuits.

[Word Count: 345]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan ESDA8V2-1J dalam solusi teknis

  1. What is ESDA8V2-1J?

    • ESDA8V2-1J is a transient voltage suppressor diode designed to protect sensitive electronics from electrostatic discharge (ESD) and electrical transients.

  2. What is the maximum voltage rating of ESDA8V2-1J?

    • The maximum voltage rating of ESDA8V2-1J is typically 8.2 volts.

  3. What is the typical application of ESDA8V2-1J in technical solutions?

    • ESDA8V2-1J is commonly used in electronic circuits and interfaces to protect against ESD events and voltage transients.

  4. How does ESDA8V2-1J provide protection against ESD?

    • ESDA8V2-1J clamps the voltage level to a safe value when an ESD event occurs, diverting the excess energy away from the protected circuitry.

  5. What are the key features of ESDA8V2-1J that make it suitable for technical solutions?

    • ESDA8V2-1J offers low capacitance, fast response time, and high surge current capability, making it ideal for protecting sensitive components in technical applications.

  6. Can ESDA8V2-1J be used in high-speed data lines?

    • Yes, ESDA8V2-1J's low capacitance makes it suitable for use in high-speed data lines without introducing significant signal degradation.

  7. What is the operating temperature range of ESDA8V2-1J?

    • ESDA8V2-1J typically operates within a temperature range of -55°C to 125°C, making it suitable for a wide range of environments.

  8. Is ESDA8V2-1J RoHS compliant?

    • Yes, ESDA8V2-1J is compliant with the Restriction of Hazardous Substances (RoHS) directive, ensuring its environmental safety.

  9. What are the recommended mounting and soldering techniques for ESDA8V2-1J?

    • ESDA8V2-1J is typically surface-mountable and should be soldered using industry-standard reflow or wave soldering processes.

  10. Are there any specific layout considerations when integrating ESDA8V2-1J into a PCB design?

    • It is important to minimize trace lengths and maintain proper grounding to optimize the performance of ESDA8V2-1J in a PCB layout.