STMicroelectronics
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
74VHCT16244ATTR
Lihat Detail Lembar Data

Encyclopedia Entry: 74VHCT16244ATTR

Product Overview

Category

The 74VHCT16244ATTR belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for signal amplification and transmission purposes.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with various logic families

Package

The 74VHCT16244ATTR is available in a standard 48-pin TSSOP (Thin Shrink Small Outline Package) package.

Essence

The essence of the 74VHCT16244ATTR lies in its ability to amplify and transmit signals efficiently while consuming minimal power.

Packaging/Quantity

The IC is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of chips. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply Voltage Range: 2.0V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Propagation Delay: 6ns
  • Maximum Power Dissipation: 500mW

Detailed Pin Configuration

The 74VHCT16244ATTR has a total of 48 pins, which are organized as follows:

  • Pins 1-8: Output Enable (OE) pins for each of the eight output buffers.
  • Pins 9-16: Data Input (D) pins for each of the eight input buffers.
  • Pins 17-24: Data Output (Q) pins for each of the eight output buffers.
  • Pins 25-32: Ground (GND) pins.
  • Pins 33-40: Supply Voltage (VCC) pins.
  • Pins 41-48: Input/Output (I/O) pins for each of the eight input/output buffers.

Functional Features

  • Eight bidirectional buffers with separate output enable control.
  • Non-inverting outputs.
  • High-speed operation suitable for various applications.
  • Low power consumption, making it ideal for battery-powered devices.
  • Wide operating voltage range allows compatibility with different logic families.

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient signal transmission.
  • Low power consumption prolongs battery life in portable devices.
  • Wide operating voltage range provides flexibility in system design.
  • Compatibility with various logic families simplifies integration into existing circuits.

Disadvantages

  • Limited number of input/output buffers may restrict the complexity of certain designs.
  • Propagation delay of 6ns may not be suitable for ultra-high-speed applications.

Working Principles

The 74VHCT16244ATTR operates by receiving input signals through the data input pins (D) and amplifying them using the internal buffers. The amplified signals are then transmitted to the corresponding output pins (Q) based on the state of the output enable pins (OE). The IC functions as a bidirectional buffer, allowing data to flow in both directions.

Detailed Application Field Plans

The 74VHCT16244ATTR finds applications in various electronic systems, including but not limited to: - Data communication equipment - Computer peripherals - Industrial automation systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the 74VHCT16244ATTR include: - SN74LVC16244A - MC74VHCT16244A - CD74HCT16244A - 74HC16244

These alternative models can be considered based on specific requirements and compatibility with existing circuitry.

In conclusion, the 74VHCT16244ATTR is a versatile integrated circuit that provides high-speed signal amplification and transmission capabilities. Its low power consumption, wide operating voltage range, and compatibility with various logic families make it suitable for a wide range of applications in different industries.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan 74VHCT16244ATTR dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of 74VHCT16244ATTR in technical solutions:

  1. Q: What is the 74VHCT16244ATTR? A: The 74VHCT16244ATTR is a high-speed, low-power, 16-bit buffer/line driver with 3-state outputs.

  2. Q: What is the purpose of the 74VHCT16244ATTR? A: It is used to provide buffering and signal amplification for digital signals in various electronic circuits.

  3. Q: What voltage levels does the 74VHCT16244ATTR support? A: It supports voltage levels from 2V to 5.5V, making it compatible with a wide range of digital systems.

  4. Q: How many channels does the 74VHCT16244ATTR have? A: It has 16 channels, allowing it to handle 16 individual digital signals simultaneously.

  5. Q: Can the 74VHCT16244ATTR be used as a bidirectional buffer? A: Yes, it can be used as a bidirectional buffer by enabling the direction control pins appropriately.

  6. Q: What is the maximum data transfer rate supported by the 74VHCT16244ATTR? A: It can support data transfer rates up to 200MHz, making it suitable for high-speed applications.

  7. Q: Does the 74VHCT16244ATTR have built-in protection features? A: Yes, it has built-in ESD protection on all inputs and outputs, ensuring reliability in harsh environments.

  8. Q: Can the 74VHCT16244ATTR drive capacitive loads? A: Yes, it can drive capacitive loads up to 50pF, allowing it to interface with various types of devices.

  9. Q: What is the power supply voltage range for the 74VHCT16244ATTR? A: It operates within a power supply voltage range of 4.5V to 5.5V.

  10. Q: Is the 74VHCT16244ATTR available in different package options? A: Yes, it is available in various package options such as SOIC, TSSOP, and SSOP, providing flexibility in design integration.

Please note that these questions and answers are general and may vary depending on specific application requirements.