STMicroelectronics
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
1.5KE6V8CARL
Lihat Detail Lembar Data

1.5KE6V8CARL - Product Overview and Analysis

Introduction

The 1.5KE6V8CARL is a specialized electronic component belonging to the category of transient voltage suppressor diodes. This entry provides an in-depth analysis of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protection against voltage transients in electronic circuits
  • Characteristics: High surge capability, fast response time, low clamping voltage
  • Package: Axial leaded, DO-201AD
  • Essence: Safeguarding electronic components from voltage spikes
  • Packaging/Quantity: Available in reels or bulk packaging, quantity varies based on supplier

Specifications

  • Voltage - Reverse Standoff (Typ): 6.8V
  • Voltage - Breakdown (Min): 7.14V
  • Voltage - Clamping (Max) @ Ipp: 11V
  • Current - Peak Pulse (10/1000µs): 91.3A
  • Power - Peak Pulse: 1500W
  • Operating Temperature: -55°C to 175°C
  • Mounting Type: Through Hole
  • Package / Case: DO-201AD, Axial

Detailed Pin Configuration

The 1.5KE6V8CARL has a standard axial leaded package with two leads. The anode is connected to one lead, while the cathode is connected to the other lead.

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient voltages to protect sensitive electronic components.
  • Fast Response Time: Rapid reaction to voltage spikes ensures minimal impact on the circuitry.
  • High Surge Capability: Capable of withstanding high surge currents without degradation.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • High surge capability

Disadvantages

  • Limited to specific voltage ratings
  • Requires proper installation for optimal performance

Working Principles

When a voltage transient occurs, the 1.5KE6V8CARL conducts current to divert the excess energy away from the protected circuit. It rapidly clamps the voltage to a safe level, preventing damage to downstream components.

Detailed Application Field Plans

The 1.5KE6V8CARL is commonly used in various electronic systems, including: - Power supplies - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • 1.5KE6V2CARL: Lower reverse standoff voltage
  • 1.5KE6V8CA: Similar characteristics with a different package
  • 1.5KE7V5CARL: Higher reverse standoff voltage

In conclusion, the 1.5KE6V8CARL transient voltage suppressor diode offers reliable protection against voltage transients in diverse electronic applications. Its fast response time, high surge capability, and effective clamping voltage make it a valuable component in safeguarding sensitive circuits.

Word Count: 410

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan 1.5KE6V8CARL dalam solusi teknis

  1. What is the maximum power dissipation of 1.5KE6V8CARL?

    • The maximum power dissipation of 1.5KE6V8CARL is 1500W for a 10/1000μs waveform.

  2. What is the peak pulse current capability of 1.5KE6V8CARL?

    • The peak pulse current capability of 1.5KE6V8CARL is 202.4A for an 8/20μs waveform.

  3. What is the breakdown voltage of 1.5KE6V8CARL?

    • The breakdown voltage of 1.5KE6V8CARL is 6.8V.

  4. What is the clamping voltage of 1.5KE6V8CARL?

    • The clamping voltage of 1.5KE6V8CARL is 11.4V at 10A.

  5. What is the operating temperature range of 1.5KE6V8CARL?

    • The operating temperature range of 1.5KE6V8CARL is -55°C to +175°C.

  6. What is the package type of 1.5KE6V8CARL?

    • The package type of 1.5KE6V8CARL is axial.

  7. What are the typical applications of 1.5KE6V8CARL?

    • Typical applications of 1.5KE6V8CARL include transient voltage suppression in automotive electronics, industrial equipment, and telecommunications systems.

  8. Does 1.5KE6V8CARL meet RoHS compliance?

    • Yes, 1.5KE6V8CARL is compliant with the Restriction of Hazardous Substances (RoHS) directive.

  9. What is the lead-free status of 1.5KE6V8CARL?

    • 1.5KE6V8CARL is lead-free and meets the requirements of lead-free assembly.

  10. Is 1.5KE6V8CARL suitable for surge protection in power supply units?

    • Yes, 1.5KE6V8CARL is suitable for surge protection in power supply units due to its high power dissipation and peak pulse current capability.