SSI Technologies Inc
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
P51-100-A-M-I36-4.5OVP-000-000
Lihat Detail Lembar Data

P51-100-A-M-I36-4.5OVP-000-000

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: Precision voltage regulation, compact design
Package: Surface Mount Device (SMD)
Essence: Regulates input voltage to a precise output level
Packaging/Quantity: Typically packaged in reels of 3000 units

Specifications

  • Input Voltage: 5V to 36V
  • Output Voltage: 4.5V
  • Maximum Current: 100mA
  • Overvoltage Protection: Yes

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)
  4. N/C (Not Connected)

Functional Features

  • Precise voltage regulation
  • Overvoltage protection
  • Compact SMD package

Advantages and Disadvantages

Advantages: - Precise voltage regulation - Small form factor - Overvoltage protection

Disadvantages: - Limited maximum current capacity - Not suitable for high-power applications

Working Principles

The P51-100-A-M-I36-4.5OVP-000-000 uses internal circuitry to monitor the input voltage and adjust the output voltage to a precise level. When an overvoltage condition is detected, the device activates protection mechanisms to safeguard connected components.

Detailed Application Field Plans

  • Battery-powered devices
  • Portable electronics
  • IoT devices
  • Automotive electronics

Detailed and Complete Alternative Models

  1. P51-200-A-M-I36-4.5OVP-000-000

    • Higher maximum current capacity
    • Otherwise similar specifications

  2. P51-100-A-M-I36-5.0OVP-000-000

    • Output voltage of 5.0V
    • Otherwise similar specifications

In conclusion, the P51-100-A-M-I36-4.5OVP-000-000 is a precision voltage regulator designed for low-power applications, offering precise voltage regulation and overvoltage protection. It finds application in various electronic devices, especially those requiring compact and efficient power management solutions.

Word count: 287

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan P51-100-A-M-I36-4.5OVP-000-000 dalam solusi teknis

  1. What is the application of P51-100-A-M-I36-4.5OVP-000-000?

    • The P51-100-A-M-I36-4.5OVP-000-000 is a pressure sensor commonly used in industrial and technical solutions to measure and monitor pressure in various systems.

  2. What are the key features of P51-100-A-M-I36-4.5OVP-000-000?

    • This sensor features a 4-20 mA output, a 1/4" NPT male process connection, and a range of 0-100 psi, making it suitable for a wide range of applications.

  3. How does P51-100-A-M-I36-4.5OVP-000-000 help in technical solutions?

    • It provides accurate and reliable pressure measurements, allowing for precise control and monitoring of pressure in industrial processes and equipment.

  4. What are the typical industries that use P51-100-A-M-I36-4.5OVP-000-000?

    • Industries such as manufacturing, oil and gas, automotive, aerospace, and HVAC commonly utilize this sensor for pressure monitoring and control.

  5. Can P51-100-A-M-I36-4.5OVP-000-000 be used in hazardous environments?

    • Yes, this sensor is available with intrinsically safe approvals, making it suitable for use in hazardous or explosive atmospheres.

  6. What is the operating temperature range of P51-100-A-M-I36-4.5OVP-000-000?

    • The sensor can typically operate within a temperature range of -40°C to 85°C, allowing for use in diverse environmental conditions.

  7. Is P51-100-A-M-I36-4.5OVP-000-000 compatible with different control systems?

    • Yes, it can be integrated with various control and monitoring systems, including PLCs, SCADA systems, and DCS platforms.

  8. How do you calibrate P51-100-A-M-I36-4.5OVP-000-000?

    • Calibration procedures may vary, but typically involve applying known pressures to the sensor and adjusting the output to match the expected values.

  9. What maintenance is required for P51-100-A-M-I36-4.5OVP-000-000?

    • Regular inspection for damage, cleaning of the sensing element, and verification of accuracy through calibration are common maintenance tasks.

  10. Where can I find technical specifications and installation guidelines for P51-100-A-M-I36-4.5OVP-000-000?

    • Technical specifications and installation guidelines are usually provided by the manufacturer and can be found in the product datasheet or user manual.