Sharp Microelectronics
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
GP1UE28QK00F
Lihat Detail Lembar Data

GP1UE28QK00F

Product Overview

  • Category: Electronic Component
  • Use: Infrared Sensor
  • Characteristics: High sensitivity, compact design
  • Package: Surface Mount Device (SMD)
  • Essence: Detecting infrared radiation
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Operating Voltage: 2.7V to 5.5V
  • Output Current: 1.5mA
  • Peak Wavelength: 950nm
  • Response Time: 18μs
  • Operating Temperature: -25°C to 85°C

Detailed Pin Configuration

  1. VCC
  2. GND
  3. Output

Functional Features

  • High sensitivity to infrared radiation
  • Low power consumption
  • Fast response time

Advantages

  • Compact size for easy integration
  • Wide operating voltage range
  • Reliable performance in various environmental conditions

Disadvantages

  • Limited detection range
  • Susceptible to interference from ambient infrared sources

Working Principles

The GP1UE28QK00F operates based on the principle of detecting infrared radiation emitted by objects within its field of view. When infrared radiation is detected, the sensor generates an output signal proportional to the intensity of the radiation.

Detailed Application Field Plans

The GP1UE28QK00F is suitable for various applications including: - Proximity sensing in consumer electronics - Object detection in robotics - Presence detection in automated lighting systems

Detailed and Complete Alternative Models

  1. GP2Y0A21YK0F (Sharp)
    • Similar infrared sensor with longer detection range
    • Operating voltage: 4.5V to 5.5V
    • Output current: 20mA
  2. TSOP38238 (Vishay)
    • Infrared receiver module with integrated demodulator
    • Operating voltage: 2.5V to 5.5V
    • Carrier frequency: 38kHz

This completes the English editing encyclopedia entry structure for GP1UE28QK00F, providing comprehensive information about the product, its specifications, features, and alternative models.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan GP1UE28QK00F dalam solusi teknis

  1. What is GP1UE28QK00F?

    • GP1UE28QK00F is a high-speed, high-sensitivity photodetector with a built-in amplifier, commonly used in optical communication and sensing applications.

  2. What is the operating wavelength range of GP1UE28QK00F?

    • The operating wavelength range of GP1UE28QK00F is typically around 800nm to 1000nm.

  3. What is the responsivity of GP1UE28QK00F?

    • The responsivity of GP1UE28QK00F is typically around 0.9 A/W at 850nm.

  4. What are the typical applications of GP1UE28QK00F?

    • GP1UE28QK00F is commonly used in fiber optic communication systems, optical data links, and industrial sensing applications.

  5. What is the maximum data rate supported by GP1UE28QK00F?

    • GP1UE28QK00F can support data rates up to several gigabits per second, making it suitable for high-speed communication systems.

  6. What is the supply voltage requirement for GP1UE28QK00F?

    • The supply voltage requirement for GP1UE28QK00F is typically around 3.3V.

  7. Does GP1UE28QK00F require an external amplifier?

    • No, GP1UE28QK00F has a built-in amplifier, eliminating the need for an external amplifier in many applications.

  8. What is the package type of GP1UE28QK00F?

    • GP1UE28QK00F is typically available in a small surface-mount package for easy integration into compact designs.

  9. Is GP1UE28QK00F sensitive to ambient light?

    • GP1UE28QK00F has a high sensitivity and is designed to minimize the impact of ambient light in its intended applications.

  10. Can GP1UE28QK00F be used in harsh environments?

    • GP1UE28QK00F is designed to operate reliably in a wide range of environmental conditions, making it suitable for use in harsh industrial environments.