Sensirion AG
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SHT35-DIS-B
Lihat Detail Lembar Data

SHT35-DIS-B: Product Overview and Specifications

Introduction

The SHT35-DIS-B belongs to the category of digital humidity and temperature sensors. This advanced sensor is widely used in various applications due to its high precision, reliability, and small form factor.

Basic Information Overview

  • Category: Digital Humidity and Temperature Sensor
  • Use: Measure and monitor humidity and temperature in various environments
  • Characteristics: High precision, reliability, small form factor
  • Package: Surface-mount device (SMD)
  • Essence: Accurate and reliable measurement of humidity and temperature
  • Packaging/Quantity: Typically available in reels of 1000 units

Specifications

  • Humidity Measurement Range: 0-100% RH
  • Temperature Measurement Range: -40°C to 125°C
  • Accuracy: ±1.5% RH, ±0.2°C
  • Supply Voltage: 2.4V to 5.5V
  • Interface: I2C or UART

Detailed Pin Configuration

The SHT35-DIS-B features a standard pin configuration with pins for power supply, communication interface, and output signals. The detailed pinout is as follows: - Pin 1: VDD (Power Supply) - Pin 2: SDA (I2C Data Line) / TX (UART Transmit) - Pin 3: SCL (I2C Clock Line) / RX (UART Receive) - Pin 4: GND (Ground)

Functional Features

  • High Precision: Provides accurate humidity and temperature measurements
  • Fast Response Time: Delivers real-time data for quick monitoring and control
  • Low Power Consumption: Ideal for battery-powered applications
  • Digital Interface: Supports easy integration with microcontrollers and other devices

Advantages and Disadvantages

Advantages

  • High accuracy and reliability
  • Compact size for easy integration
  • Wide operating temperature range
  • Low power consumption

Disadvantages

  • Cost may be higher compared to some traditional sensors
  • Requires careful handling during assembly and soldering

Working Principles

The SHT35-DIS-B utilizes a capacitive humidity sensor and a band-gap temperature sensor to accurately measure the relative humidity and temperature of the surrounding environment. The sensor's analog signals are converted to digital values using a built-in ADC, and the data is transmitted through the selected interface.

Detailed Application Field Plans

The SHT35-DIS-B finds extensive use in various industries and applications, including: - HVAC Systems - Weather Stations - Industrial Automation - Medical Devices - Automotive Applications - Consumer Electronics

Detailed and Complete Alternative Models

  • SHT30-DIS-B: A lower-cost alternative with slightly reduced accuracy
  • SHT40-DIS-B: Offers higher accuracy and extended temperature range
  • SHT85-DIS-B: Enhanced precision and robustness for demanding applications

In conclusion, the SHT35-DIS-B digital humidity and temperature sensor offers exceptional performance and versatility, making it an ideal choice for a wide range of applications that require precise environmental monitoring.

[Word Count: 420]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SHT35-DIS-B dalam solusi teknis

  1. What is the operating voltage range of SHT35-DIS-B?

    • The operating voltage range of SHT35-DIS-B is 2.15V to 5.5V.

  2. What is the typical accuracy of SHT35-DIS-B?

    • The typical accuracy of SHT35-DIS-B is ±1% RH and ±0.2°C.

  3. Can SHT35-DIS-B be used in outdoor applications?

    • Yes, SHT35-DIS-B can be used in outdoor applications as it has a wide operating temperature range and is designed for harsh environments.

  4. Does SHT35-DIS-B have digital output?

    • Yes, SHT35-DIS-B provides digital output in the form of I2C and SPI interfaces.

  5. What is the response time of SHT35-DIS-B?

    • The response time of SHT35-DIS-B is typically 8 seconds.

  6. Is SHT35-DIS-B suitable for battery-powered devices?

    • Yes, SHT35-DIS-B is suitable for battery-powered devices due to its low power consumption.

  7. Can SHT35-DIS-B measure both temperature and humidity?

    • Yes, SHT35-DIS-B is capable of measuring both temperature and humidity accurately.

  8. What is the maximum communication distance supported by SHT35-DIS-B?

    • SHT35-DIS-B supports communication distances of up to several meters, depending on the interface used.

  9. Is SHT35-DIS-B calibrated at the factory?

    • Yes, SHT35-DIS-B is factory calibrated, providing accurate measurements without the need for additional calibration.

  10. Does SHT35-DIS-B have built-in heater functionality?

    • Yes, SHT35-DIS-B features a built-in heater for applications requiring condensation prevention or fast recovery from high humidity conditions.