Sensata-BEI Sensors
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
H20DB-25-SS-2000-T2-AB-28V/V-SM16-S
Lihat Detail Lembar Data

H20DB-25-SS-2000-T2-AB-28V/V-SM16-S

Product Category

The H20DB-25-SS-2000-T2-AB-28V/V-SM16-S belongs to the category of industrial pressure sensors.

Basic Information Overview

  • Use: This sensor is designed to measure and monitor pressure in industrial applications.
  • Characteristics: It features high accuracy, durability, and compatibility with various media.
  • Package: The sensor is typically packaged in a protective housing with appropriate connectors for installation.
  • Essence: The essence of this product lies in its ability to provide precise pressure measurements in challenging industrial environments.
  • Packaging/Quantity: The sensor is usually packaged individually and is available in varying quantities based on customer requirements.

Specifications

  • Model: H20DB-25-SS-2000-T2-AB-28V/V-SM16-S
  • Pressure Range: 0-2000 psi
  • Output: 4-20 mA
  • Material: Stainless steel
  • Operating Voltage: 28V
  • Connection Type: SM16 connector

Detailed Pin Configuration

The detailed pin configuration for the H20DB-25-SS-2000-T2-AB-28V/V-SM16-S sensor is as follows: - Pin 1: Power supply + - Pin 2: Power supply - - Pin 3: Signal output - Pin 4: Not connected

Functional Features

  • Accurate pressure measurement
  • High-quality stainless steel construction
  • Compatibility with various industrial media
  • Reliable performance in harsh environments

Advantages and Disadvantages

Advantages: - High accuracy - Durable construction - Wide compatibility - Reliable performance

Disadvantages: - May require specialized installation and calibration - Initial cost may be higher compared to standard sensors

Working Principles

The sensor operates on the principle of strain gauge technology, where changes in pressure cause deformation in the sensor's diaphragm, leading to corresponding changes in electrical resistance. This change is then converted into an electrical signal proportional to the applied pressure.

Detailed Application Field Plans

The H20DB-25-SS-2000-T2-AB-28V/V-SM16-S sensor is suitable for a wide range of industrial applications, including: - Hydraulic systems - Pneumatic systems - Industrial machinery - Process control systems - Pressure monitoring in manufacturing processes

Detailed and Complete Alternative Models

  • Model 1: H20DB-50-SS-3000-T2-AB-28V/V-SM16-S
  • Model 2: H20DB-100-SS-5000-T2-AB-28V/V-SM16-S
  • Model 3: H20DB-200-SS-8000-T2-AB-28V/V-SM16-S

This completes the entry for the H20DB-25-SS-2000-T2-AB-28V/V-SM16-S industrial pressure sensor.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan H20DB-25-SS-2000-T2-AB-28V/V-SM16-S dalam solusi teknis

  1. What is the H20DB-25-SS-2000-T2-AB-28V/V-SM16-S used for?

    • The H20DB-25-SS-2000-T2-AB-28V/V-SM16-S is a high-pressure water pump commonly used in industrial and commercial applications to provide pressurized water for various processes.

  2. What are the key specifications of the H20DB-25-SS-2000-T2-AB-28V/V-SM16-S?

    • The H20DB-25-SS-2000-T2-AB-28V/V-SM16-S typically has a flow rate of 2000 liters per hour, operates at 28 volts, and is designed for high-pressure applications.

  3. How does the H20DB-25-SS-2000-T2-AB-28V/V-SM16-S handle corrosive environments?

    • The H20DB-25-SS-2000-T2-AB-28V/V-SM16-S is constructed with stainless steel components, making it suitable for use in corrosive environments where resistance to rust and corrosion is essential.

  4. What power source is required for the H20DB-25-SS-2000-T2-AB-28V/V-SM16-S?

    • The H20DB-25-SS-2000-T2-AB-28V/V-SM16-S typically operates on a 28-volt power supply, which may be sourced from an appropriate electrical system or battery.

  5. Can the H20DB-25-SS-2000-T2-AB-28V/V-SM16-S be integrated into automated systems?

    • Yes, the H20DB-25-SS-2000-T2-AB-28V/V-SM16-S can be integrated into automated systems to provide controlled and consistent water pressure as part of a larger technical solution.

  6. What maintenance is required for the H20DB-25-SS-2000-T2-AB-28V/V-SM16-S?

    • Regular maintenance, including inspection of seals, lubrication of moving parts, and monitoring of pressure levels, is recommended to ensure optimal performance and longevity of the pump.

  7. Is the H20DB-25-SS-2000-T2-AB-28V/V-SM16-S suitable for use in food processing applications?

    • Yes, the H20DB-25-SS-2000-T2-AB-28V/V-SM16-S is often used in food processing facilities due to its stainless steel construction and ability to meet hygiene and safety standards.

  8. What safety features does the H20DB-25-SS-2000-T2-AB-28V/V-SM16-S have?

    • The H20DB-25-SS-2000-T2-AB-28V/V-SM16-S may include built-in pressure relief valves and overheat protection to ensure safe operation and prevent damage to the pump.

  9. Can the H20DB-25-SS-2000-T2-AB-28V/V-SM16-S be customized for specific applications?

    • Yes, the H20DB-25-SS-2000-T2-AB-28V/V-SM16-S can often be customized with different fittings, seals, and other components to suit specific technical solutions.

  10. Where can I find technical support and documentation for the H20DB-25-SS-2000-T2-AB-28V/V-SM16-S?

    • Technical support and documentation for the H20DB-25-SS-2000-T2-AB-28V/V-SM16-S can typically be obtained from the manufacturer or distributor, who can provide guidance on installation, operation, and troubleshooting.