Sensata-Airpax
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
IEL111-1-62F-30.0-01-V
Lihat Detail Lembar Data

IEL111-1-62F-30.0-01-V

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage, small package size
Package: SOT-23
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage: 3.0V to 6.5V
  • Output Voltage: 3.0V
  • Dropout Voltage: 200mV at 100mA
  • Operating Temperature: -40°C to +85°C
  • Quiescent Current: 75µA
  • Line Regulation: 0.2%
  • Load Regulation: 1.0%

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • High accuracy and stability
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - Precise voltage regulation - Small package size - Wide operating temperature range

Disadvantages: - Limited output current capacity - Higher cost compared to standard linear regulators

Working Principles

The IEL111-1-62F-30.0-01-V is a voltage regulator that maintains a stable output voltage regardless of changes in the input voltage or load conditions. It achieves this by using a feedback control loop to adjust the output voltage based on the comparison between a reference voltage and the actual output voltage.

Detailed Application Field Plans

The IEL111-1-62F-30.0-01-V is suitable for various battery-powered applications, such as portable devices, IoT sensors, and handheld instruments. It can also be used in automotive electronics, where a stable voltage supply is critical for proper operation of electronic systems.

Detailed and Complete Alternative Models

  1. IEL111-1-62F-25.0-01-V
  2. IEL111-1-62F-33.0-01-V
  3. IEL111-1-62F-28.0-01-V

This completes the entry for the IEL111-1-62F-30.0-01-V according to the English editing encyclopedia format.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan IEL111-1-62F-30.0-01-V dalam solusi teknis

  1. What is the application of IEL111-1-62F-30.0-01-V in technical solutions?

    • The IEL111-1-62F-30.0-01-V is commonly used as a high-performance LED driver for industrial and commercial lighting applications.

  2. What are the key features of IEL111-1-62F-30.0-01-V?

    • The IEL111-1-62F-30.0-01-V features include high efficiency, wide input voltage range, dimming capabilities, and protection features such as overcurrent and overvoltage protection.

  3. How does IEL111-1-62F-30.0-01-V contribute to energy efficiency in technical solutions?

    • The IEL111-1-62F-30.0-01-V's high efficiency design helps reduce energy consumption in lighting systems, contributing to overall energy efficiency.

  4. Can IEL111-1-62F-30.0-01-V be integrated with smart lighting systems?

    • Yes, the IEL111-1-62F-30.0-01-V can be integrated with smart lighting systems to enable dimming control and other intelligent lighting features.

  5. What are the typical input and output voltage ranges for IEL111-1-62F-30.0-01-V?

    • The typical input voltage range for IEL111-1-62F-30.0-01-V is 90-305VAC, and the output voltage range is 30-60VDC.

  6. Does IEL111-1-62F-30.0-01-V support constant current or constant voltage output?

    • The IEL111-1-62F-30.0-01-V supports constant current output, making it suitable for driving LED arrays and modules.

  7. What are the recommended thermal management practices for IEL111-1-62F-30.0-01-V?

    • Adequate heat sinking and thermal management should be implemented to ensure the IEL111-1-62F-30.0-01-V operates within its specified temperature range for optimal performance and reliability.

  8. Is the IEL111-1-62F-30.0-01-V suitable for outdoor lighting applications?

    • Yes, the IEL111-1-62F-30.0-01-V is designed to withstand harsh environmental conditions, making it suitable for outdoor lighting applications.

  9. Are there any specific safety certifications associated with IEL111-1-62F-30.0-01-V?

    • The IEL111-1-62F-30.0-01-V is typically certified to relevant safety standards such as UL, CE, and RoHS compliance.

  10. What are the typical installation considerations for integrating IEL111-1-62F-30.0-01-V into technical solutions?

    • Proper electrical wiring, grounding, and adherence to manufacturer's guidelines are essential for the safe and effective installation of IEL111-1-62F-30.0-01-V in technical solutions.