Rohm Semiconductor
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
RB050LA-40TR
Lihat Detail Lembar Data

RB050LA-40TR

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: Low dropout, high accuracy
Package: TO-252
Essence: Regulates voltage with minimal dropout
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage: 4.5V to 40V
  • Output Voltage: 3.3V
  • Output Current: 500mA
  • Dropout Voltage: 0.25V at 500mA
  • Accuracy: ±2%
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)

Functional Features

  • Low dropout voltage
  • High accuracy
  • Thermal shutdown protection
  • Short-circuit current limit

Advantages and Disadvantages

Advantages: - Wide input voltage range - Small package size - Low dropout voltage

Disadvantages: - Limited output current - Higher cost compared to traditional linear regulators

Working Principles

The RB050LA-40TR is a low dropout voltage regulator that maintains a stable output voltage even when the input voltage is close to the desired output voltage. It achieves this by using a PNP pass transistor to minimize the dropout voltage.

Detailed Application Field Plans

The RB050LA-40TR is suitable for various applications requiring a stable 3.3V power supply, such as: - Battery-powered devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  • LM1117-3.3
  • XC6206P332MR

This content provides a comprehensive overview of the RB050LA-40TR, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan RB050LA-40TR dalam solusi teknis

  1. What is the RB050LA-40TR?

    • The RB050LA-40TR is a Schottky barrier diode designed for high-speed switching applications.

  2. What are the key features of RB050LA-40TR?

    • The key features include low forward voltage drop, fast switching speed, and high reliability.

  3. What are the typical applications of RB050LA-40TR?

    • Typical applications include power supply circuits, polarity protection, and freewheeling diodes in various electronic devices.

  4. What is the maximum forward voltage of RB050LA-40TR?

    • The maximum forward voltage is typically around 0.55V at a forward current of 500mA.

  5. What is the reverse voltage rating of RB050LA-40TR?

    • The reverse voltage rating is 40V, making it suitable for low voltage applications.

  6. Can RB050LA-40TR be used in high-frequency applications?

    • Yes, RB050LA-40TR is designed for high-speed switching applications, making it suitable for high-frequency use.

  7. What is the operating temperature range of RB050LA-40TR?

    • The operating temperature range is typically -65°C to +125°C, ensuring its suitability for a wide range of environments.

  8. Does RB050LA-40TR require a heat sink for operation?

    • For most typical applications, RB050LA-40TR does not require a heat sink due to its low forward voltage drop and efficient thermal characteristics.

  9. Is RB050LA-40TR RoHS compliant?

    • Yes, RB050LA-40TR is RoHS compliant, meeting environmental standards for electronic components.

  10. Where can I find detailed technical specifications for RB050LA-40TR?

    • Detailed technical specifications can be found in the product datasheet provided by the manufacturer or distributor.