Lihat spesifikasi untuk detail produk.
BA2903FVM-TR
Product Overview
Category
BA2903FVM-TR belongs to the category of integrated circuits (ICs).
Use
This product is commonly used as a voltage comparator in various electronic applications.
Characteristics
- Low power consumption
- Wide operating voltage range
- High-speed response
- Rail-to-rail input and output capability
Package
BA2903FVM-TR is available in a small surface mount package, typically a SOP-8 (Small Outline Package) or similar.
Essence
The essence of BA2903FVM-TR lies in its ability to compare two input voltages and provide a digital output based on their relative magnitudes.
Packaging/Quantity
BA2903FVM-TR is usually packaged in reels or tubes, with a typical quantity of 2500 units per reel.
Specifications
- Supply Voltage Range: 2V to 36V
- Input Offset Voltage: ±1mV (maximum)
- Input Bias Current: ±5nA (maximum)
- Response Time: 1μs (typical)
- Output Sink Current: 20mA (maximum)
Detailed Pin Configuration
BA2903FVM-TR features an 8-pin configuration:
- Non-Inverting Input (+IN)
- Inverting Input (-IN)
- VCC (Positive Power Supply)
- GND (Ground)
- Output
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
Functional Features
- High-speed voltage comparison
- Wide operating voltage range allows for versatile applications
- Rail-to-rail input and output capability ensures accurate comparisons even at extreme voltage levels
- Low power consumption makes it suitable for battery-powered devices
Advantages and Disadvantages
Advantages
- Low power consumption extends battery life in portable devices
- Wide operating voltage range enables compatibility with various power sources
- Rail-to-rail input and output capability ensures accurate comparisons across the entire voltage spectrum
Disadvantages
- Limited output sink current may restrict use in high-current applications
- Input offset voltage may introduce small errors in precision applications
Working Principles
BA2903FVM-TR operates by comparing the voltages applied to its non-inverting and inverting inputs. The output is driven high or low depending on the relative magnitudes of these voltages. It utilizes internal circuitry to achieve high-speed response, rail-to-rail operation, and low power consumption.
Detailed Application Field Plans
BA2903FVM-TR finds application in various fields, including but not limited to: - Battery-powered devices - Automotive electronics - Industrial control systems - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to BA2903FVM-TR are: - LM339 - LM393 - MAX9025 - TS3011
These models offer similar functionality and characteristics, providing options for different design requirements.
Word count: 386 words
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan BA2903FVM-TR dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of BA2903FVM-TR in technical solutions:
Q: What is BA2903FVM-TR? A: BA2903FVM-TR is a specific model of operational amplifier (op-amp) integrated circuit commonly used in various electronic applications.
Q: What are the key features of BA2903FVM-TR? A: Some key features of BA2903FVM-TR include low input offset voltage, low input bias current, wide supply voltage range, and rail-to-rail output swing capability.
Q: What are the typical applications of BA2903FVM-TR? A: BA2903FVM-TR can be used in various applications such as voltage amplification, signal conditioning, active filters, comparators, and voltage references.
Q: What is the maximum supply voltage for BA2903FVM-TR? A: The maximum supply voltage for BA2903FVM-TR is typically around 36 volts.
Q: What is the input offset voltage of BA2903FVM-TR? A: The input offset voltage of BA2903FVM-TR is typically in the range of a few millivolts.
Q: Can BA2903FVM-TR operate with a single power supply? A: Yes, BA2903FVM-TR can operate with a single power supply, typically ranging from 3 volts to 32 volts.
Q: What is the output current capability of BA2903FVM-TR? A: The output current capability of BA2903FVM-TR is typically around 20 milliamperes.
Q: Is BA2903FVM-TR suitable for low-power applications? A: Yes, BA2903FVM-TR is designed to be suitable for low-power applications, consuming minimal power during operation.
Q: Can BA2903FVM-TR handle high-frequency signals? A: BA2903FVM-TR has a wide bandwidth and can handle moderate to high-frequency signals, making it suitable for many applications.
Q: Is BA2903FVM-TR available in surface mount package? A: Yes, BA2903FVM-TR is commonly available in a surface mount package, which makes it easier to integrate into compact electronic designs.
Please note that the specific details and specifications may vary depending on the manufacturer and version of BA2903FVM-TR. It's always recommended to refer to the datasheet provided by the manufacturer for accurate information.