Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
RT9166A-25GG

RT9166A-25GG

Product Overview

Category

RT9166A-25GG belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 6V
  • Output Voltage: 2.5V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 300mV
  • Low Quiescent Current: 50μA
  • Low Shutdown Current: 0.1μA
  • Thermal Shutdown Protection
  • Short Circuit Protection

Package

RT9166A-25GG is available in a small SOT-23 package.

Essence

The essence of RT9166A-25GG is its ability to provide a stable output voltage of 2.5V with low quiescent current and thermal shutdown protection.

Packaging/Quantity

RT9166A-25GG is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V to 6V
  • Output Voltage: 2.5V
  • Output Current: Up to 150mA
  • Dropout Voltage: 300mV
  • Quiescent Current: 50μA
  • Shutdown Current: 0.1μA
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOT-23

Detailed Pin Configuration

RT9166A-25GG has three pins:

  1. VIN (Pin 1): Input voltage pin.
  2. GND (Pin 2): Ground reference pin.
  3. VOUT (Pin 3): Output voltage pin.

Functional Features

  • Voltage regulation: RT9166A-25GG ensures a stable output voltage of 2.5V, regardless of input voltage fluctuations.
  • Low quiescent current: The regulator consumes only 50μA of current when in operation, minimizing power consumption.
  • Thermal shutdown protection: It incorporates a thermal shutdown mechanism to prevent overheating and damage.
  • Short circuit protection: RT9166A-25GG is equipped with short circuit protection to safeguard the circuit from damage.

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows for flexibility in various applications.
  • Low quiescent current minimizes power consumption.
  • Thermal shutdown protection prevents overheating and damage.
  • Short circuit protection ensures the safety of the circuit.

Disadvantages

  • Limited output current capacity (up to 150mA).
  • Dropout voltage of 300mV may affect performance in low voltage applications.

Working Principles

RT9166A-25GG operates based on the principle of linear voltage regulation. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage of 2.5V. The regulator continuously monitors the input voltage and adjusts its internal components to compensate for any variations, ensuring a consistent output voltage.

Detailed Application Field Plans

RT9166A-25GG finds applications in various electronic devices and circuits that require a stable 2.5V power supply. Some common application fields include:

  1. Battery-powered devices: Portable electronics such as smartphones, tablets, and wearable devices often require a stable voltage source for their internal components.
  2. IoT devices: Internet of Things (IoT) devices, which rely on low-power operation, can benefit from the low quiescent current and thermal shutdown protection offered by RT9166A-25GG.
  3. Sensor circuits: Many sensor circuits require a regulated voltage to ensure accurate measurements. RT9166A-25GG can provide the necessary stability in such applications.

Detailed and Complete Alternative Models

  1. RT9166A-33GG: Similar to RT9166A-25GG, but with an output voltage of 3.3V.
  2. RT9166A-50GG: Similar to RT9166A-25GG, but with an output voltage of 5V.
  3. RT9166B-25GG: An alternative model with improved specifications, offering lower dropout voltage and higher output current capacity.

(Note: This is not an exhaustive list of alternative models. Please refer to the manufacturer's documentation for a complete list.)

Word count: 550 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan RT9166A-25GG dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of RT9166A-25GG in technical solutions:

  1. Question: What is RT9166A-25GG?
    Answer: RT9166A-25GG is a voltage regulator IC (Integrated Circuit) that provides a fixed output voltage of 2.5V.

  2. Question: What is the input voltage range for RT9166A-25GG?
    Answer: The input voltage range for RT9166A-25GG is typically between 2.7V and 6V.

  3. Question: What is the maximum output current of RT9166A-25GG?
    Answer: The maximum output current of RT9166A-25GG is 100mA.

  4. Question: Can RT9166A-25GG be used in battery-powered applications?
    Answer: Yes, RT9166A-25GG can be used in battery-powered applications as it has a low dropout voltage and operates efficiently with low input voltages.

  5. Question: Is RT9166A-25GG suitable for use in automotive electronics?
    Answer: Yes, RT9166A-25GG is suitable for use in automotive electronics as it can withstand high temperatures and has built-in protection features.

  6. Question: Does RT9166A-25GG require any external components for operation?
    Answer: Yes, RT9166A-25GG requires a few external components such as input and output capacitors for stability and filtering.

  7. Question: Can RT9166A-25GG handle short-circuit conditions?
    Answer: Yes, RT9166A-25GG has built-in short-circuit protection, which prevents damage to the IC under short-circuit conditions.

  8. Question: What is the operating temperature range of RT9166A-25GG?
    Answer: The operating temperature range of RT9166A-25GG is typically between -40°C and 85°C.

  9. Question: Can RT9166A-25GG be used in low-power microcontroller applications?
    Answer: Yes, RT9166A-25GG can be used in low-power microcontroller applications as it provides a stable and regulated voltage supply.

  10. Question: Is RT9166A-25GG available in different package options?
    Answer: Yes, RT9166A-25GG is available in various package options such as SOT-23 and SOT-89 for flexibility in different application designs.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.