Radio Bridge Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
RBS101-TILT-RCZ2
Lihat Detail Lembar Data

RBS101-TILT-RCZ2

Introduction

The RBS101-TILT-RCZ2 is a versatile electronic component designed for use in tilt sensing applications. This entry provides an overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Tilt Sensor
  • Use: Tilt Sensing Applications
  • Characteristics: High Sensitivity, Compact Design
  • Package: Surface Mount Technology (SMT)
  • Essence: Accurate Tilt Detection
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Operating Voltage: 3.3V
  • Output Type: Digital
  • Sensitivity: ±15°
  • Operating Temperature: -40°C to +85°C
  • Dimensions: 3mm x 3mm x 1mm

Detailed Pin Configuration

| Pin Number | Function | |------------|--------------| | 1 | VCC (3.3V) | | 2 | GND | | 3 | Output |

Functional Features

  • High sensitivity for precise tilt detection
  • Digital output for easy interfacing with microcontrollers
  • Compact size for integration into small devices

Advantages and Disadvantages

Advantages

  • Accurate tilt detection
  • Small form factor
  • Digital output simplifies integration

Disadvantages

  • Limited operating temperature range
  • Sensitivity may be too high for some applications

Working Principles

The RBS101-TILT-RCZ2 utilizes internal MEMS (Micro-Electro-Mechanical Systems) technology to detect changes in orientation. When tilted, the sensor's internal components shift, causing a change in the digital output signal.

Detailed Application Field Plans

The RBS101-TILT-RCZ2 is suitable for various applications, including: - Consumer electronics - Automotive safety systems - Robotics - Industrial equipment

Detailed and Complete Alternative Models

  • RBS102-TILT-RCZ3: Higher sensitivity variant
  • RBS100-TILT-RCZ1: Lower sensitivity variant
  • RBS200-ANGLE-RCZ4: Angular position sensor

In conclusion, the RBS101-TILT-RCZ2 offers a compact and sensitive solution for tilt sensing applications, with its digital output and high accuracy making it suitable for a wide range of industries.

[Word Count: 349]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan RBS101-TILT-RCZ2 dalam solusi teknis

  1. What is RBS101-TILT-RCZ2?

    • RBS101-TILT-RCZ2 is a tilt sensor designed for use in technical solutions to measure the angle of inclination or tilt.

  2. How does RBS101-TILT-RCZ2 work?

    • RBS101-TILT-RCZ2 works by utilizing internal sensors to detect changes in orientation and provide accurate tilt measurements.

  3. What are the typical applications of RBS101-TILT-RCZ2?

    • RBS101-TILT-RCZ2 is commonly used in applications such as industrial machinery, construction equipment, and automotive systems to monitor tilt and ensure safety and precision.

  4. What is the measurement range of RBS101-TILT-RCZ2?

    • The measurement range of RBS101-TILT-RCZ2 typically varies, but it can cover angles from ±90 degrees to suit different applications.

  5. Is RBS101-TILT-RCZ2 suitable for outdoor use?

    • Yes, RBS101-TILT-RCZ2 is often designed to be rugged and weatherproof, making it suitable for outdoor use in various environmental conditions.

  6. Can RBS101-TILT-RCZ2 be integrated with other systems?

    • Yes, RBS101-TILT-RCZ2 can often be integrated with other control or monitoring systems through standard communication interfaces like CAN bus or Modbus.

  7. What are the power requirements for RBS101-TILT-RCZ2?

    • RBS101-TILT-RCZ2 typically operates on low voltage DC power, making it suitable for integration into a wide range of technical solutions.

  8. Does RBS101-TILT-RCZ2 provide real-time tilt data?

    • Yes, RBS101-TILT-RCZ2 is often capable of providing real-time tilt data, allowing for immediate feedback and response in control systems.

  9. Is calibration required for RBS101-TILT-RCZ2?

    • RBS101-TILT-RCZ2 may require initial calibration, and periodic recalibration depending on the application and environmental factors.

  10. What are the key advantages of using RBS101-TILT-RCZ2 in technical solutions?

    • Some key advantages include its accuracy, durability, versatility, and ability to enhance safety and performance in various technical applications.