Power Integrations
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
LNK6763K
Lihat Detail Lembar Data

LNK6763K - English Editing Encyclopedia Entry

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - Low power consumption - High efficiency - Compact size - Wide input voltage range

Package: TO-220

Essence: LNK6763K is a power management IC designed for efficient power conversion in various applications.

Packaging/Quantity: The LNK6763K is typically packaged in reels and available in quantities of 1000 units per reel.

Specifications

The LNK6763K has the following specifications:

  • Input Voltage Range: 85VAC to 265VAC
  • Output Voltage: 12V
  • Output Current: 1.5A
  • Switching Frequency: 132 kHz
  • Efficiency: Up to 88%
  • Operating Temperature Range: -40°C to +150°C

Detailed Pin Configuration

The LNK6763K features a 7-pin configuration as follows:

  1. VCC: Power supply input
  2. BP/M: Bypass/Multifunction pin
  3. FB: Feedback pin
  4. GND: Ground
  5. D: Drain pin
  6. S: Source pin
  7. NC: No connection

Functional Features

The LNK6763K offers the following functional features:

  • Primary-side control eliminates the need for an optocoupler and secondary-side feedback components.
  • Auto-restart protection feature ensures safe operation by detecting fault conditions and initiating a restart sequence.
  • Built-in frequency jittering reduces EMI emissions, enabling compliance with international standards.
  • Advanced line under-voltage protection prevents damage during low input voltage conditions.
  • Over-temperature protection safeguards the IC from excessive heat.

Advantages and Disadvantages

Advantages: - High efficiency results in reduced power consumption and lower operating costs. - Compact size allows for space-saving designs. - Wide input voltage range enables compatibility with various power sources. - Integrated protection features enhance system reliability.

Disadvantages: - Limited output current may not be suitable for high-power applications. - Requires careful thermal management due to the operating temperature range.

Working Principles

The LNK6763K utilizes primary-side control to regulate the output voltage. It operates by modulating the duty cycle of the internal power switch based on the feedback received from the secondary side. This control method eliminates the need for an optocoupler, reducing component count and cost.

Detailed Application Field Plans

The LNK6763K is commonly used in the following applications:

  1. LED Lighting: Provides efficient power conversion for LED lighting systems, ensuring optimal brightness and energy savings.
  2. Home Appliances: Enables power management in various home appliances such as refrigerators, air conditioners, and washing machines.
  3. Industrial Equipment: Facilitates power supply control in industrial equipment, enhancing overall system performance and reliability.

Detailed and Complete Alternative Models

  1. LNK6764K: Similar to LNK6763K but with higher output current capability (up to 2A).
  2. LNK6762K: Lower output voltage variant (e.g., 5V) suitable for specific applications.
  3. LNK6765K: Higher output voltage variant (e.g., 24V) for specialized requirements.

These alternative models offer similar functionality to the LNK6763K but cater to different output current or voltage requirements.

In conclusion, the LNK6763K is a power management IC that provides efficient power conversion, compact size, and wide input voltage range. Its primary-side control, integrated protection features, and various application possibilities make it a versatile choice for power management needs.

Word Count: 511

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan LNK6763K dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of LNK6763K in technical solutions:

  1. Q: What is LNK6763K? A: LNK6763K is a highly integrated, offline switcher IC designed for low-power applications.

  2. Q: What are the key features of LNK6763K? A: LNK6763K features include primary-side regulation, high efficiency, accurate constant current control, and comprehensive protection features.

  3. Q: What are the typical applications of LNK6763K? A: LNK6763K is commonly used in LED lighting, smart home devices, industrial controls, and other low-power applications.

  4. Q: How does LNK6763K achieve primary-side regulation? A: LNK6763K uses primary-side sensing and regulation techniques, eliminating the need for an optocoupler or secondary feedback circuitry.

  5. Q: Can LNK6763K operate in a wide input voltage range? A: Yes, LNK6763K can operate in a wide input voltage range, typically from 85VAC to 265VAC.

  6. Q: Does LNK6763K support dimming functionality for LED lighting? A: Yes, LNK6763K supports both analog and PWM dimming methods for LED lighting applications.

  7. Q: What is the efficiency of LNK6763K? A: LNK6763K offers high efficiency, typically up to 88%, which helps reduce power consumption and heat dissipation.

  8. Q: What protection features does LNK6763K provide? A: LNK6763K includes protection against overvoltage, overcurrent, over-temperature, and short-circuit conditions.

  9. Q: Can LNK6763K be used in offline flyback or buck-boost converter topologies? A: Yes, LNK6763K can be used in both flyback and buck-boost converter topologies, providing flexibility in design.

  10. Q: Is LNK6763K compliant with safety standards? A: Yes, LNK6763K is designed to meet various safety standards such as UL, EN, and IEC, ensuring reliable operation in different regions.

Please note that the answers provided here are general and may vary depending on specific application requirements and design considerations.