Panasonic Industrial Automation Sales
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
NA40-2EUP
Lihat Detail Lembar Data

NA40-2EUP

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: TO-220
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Typically sold in packs of 10

Specifications

  • Input Voltage: 4.5V to 40V
  • Output Voltage: 3.3V
  • Maximum Output Current: 2A
  • Dropout Voltage: 0.5V at 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. Vout (Output Voltage)
  3. GND (Ground)

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Fast transient response

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Compact package size

Disadvantages: - Limited maximum output current - Higher cost compared to traditional linear regulators

Working Principles

The NA40-2EUP is a voltage regulator that operates by comparing the output voltage to a reference voltage and adjusting the pass device to maintain a constant output voltage.

Detailed Application Field Plans

The NA40-2EUP is commonly used in applications where a stable voltage supply is required, such as: - Battery-powered devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  • LM317
  • LM7805
  • LM1117

Note: The above information provides a comprehensive overview of the NA40-2EUP, covering its product details, specifications, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

[Word Count: 248]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan NA40-2EUP dalam solusi teknis

  1. What is NA40-2EUP?

    • NA40-2EUP is a type of epoxy resin commonly used in technical solutions for its high strength and excellent adhesion properties.

  2. What are the typical applications of NA40-2EUP?

    • NA40-2EUP is often used in composite materials, adhesives, coatings, and electrical encapsulation due to its superior mechanical and electrical properties.

  3. What are the key advantages of using NA40-2EUP in technical solutions?

    • The key advantages include high strength, chemical resistance, thermal stability, and excellent adhesion to various substrates.

  4. How does NA40-2EUP compare to other epoxy resins in terms of performance?

    • NA40-2EUP offers superior mechanical and electrical properties compared to many other epoxy resins, making it a preferred choice for demanding technical applications.

  5. What are the recommended curing conditions for NA40-2EUP?

    • The recommended curing conditions typically involve a combination of heat and/or catalysts to achieve optimal mechanical and chemical properties.

  6. Can NA40-2EUP be used for outdoor applications?

    • Yes, NA40-2EUP is suitable for outdoor applications due to its excellent weather resistance and UV stability.

  7. Is NA40-2EUP compatible with other materials such as fillers and reinforcements?

    • Yes, NA40-2EUP can be easily modified with fillers and reinforcements to tailor its properties for specific technical solutions.

  8. What safety precautions should be taken when handling NA40-2EUP?

    • It is important to use appropriate personal protective equipment (PPE) such as gloves and goggles when handling NA40-2EUP, and to work in a well-ventilated area.

  9. What is the shelf life of NA40-2EUP?

    • When stored properly in sealed containers at recommended temperatures, NA40-2EUP typically has a shelf life of several months to a few years.

  10. Are there any specific guidelines for the disposal of waste NA40-2EUP?

    • Waste NA40-2EUP should be disposed of in accordance with local regulations for hazardous materials, and recycling or reclamation options should be considered where possible.