ON Semiconductor
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
NCP45525IMNTWG-H
Lihat Detail Lembar Data

NCP45525IMNTWG-H

Product Overview

Category

The NCP45525IMNTWG-H belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and thermal protection

Package

The NCP45525IMNTWG-H comes in a small outline package (SOP) with a thermal pad.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

The NCP45525IMNTWG-H is typically packaged in reels, with a quantity of 2500 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Dropout Voltage: 200mV at 1A
  • Maximum Output Current: 1.5A
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The NCP45525IMNTWG-H has the following pin configuration:

  1. VIN: Input voltage pin
  2. EN: Enable pin
  3. FB: Feedback pin
  4. GND: Ground pin
  5. VOUT: Output voltage pin

Functional Features

  • High Efficiency: The NCP45525IMNTWG-H offers high efficiency, minimizing power loss during voltage regulation.
  • Low Dropout Voltage: With a low dropout voltage, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Wide Input Voltage Range: The wide input voltage range allows for flexibility in various applications.
  • Adjustable Output Voltage: The output voltage can be adjusted within a specified range to meet specific requirements.
  • Overcurrent and Thermal Protection: This product incorporates protection mechanisms to prevent damage from overcurrent and excessive heat.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Wide input voltage range allows for versatile applications.
  • Adjustable output voltage provides flexibility.
  • Overcurrent and thermal protection ensure device safety.

Disadvantages

  • Limited maximum output current of 1.5A may not be suitable for high-power applications.
  • Dropout voltage of 200mV may affect performance in low-voltage scenarios.

Working Principles

The NCP45525IMNTWG-H operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of changes in the input voltage or load conditions.

Detailed Application Field Plans

The NCP45525IMNTWG-H finds application in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Digital cameras - Wireless communication devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the NCP45525IMNTWG-H include: - LM317T - LT1084CP - TPS7A4700

These alternatives can be considered based on specific requirements and compatibility with the target application.

Word count: 445 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan NCP45525IMNTWG-H dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of NCP45525IMNTWG-H in technical solutions:

  1. Q: What is the NCP45525IMNTWG-H? A: The NCP45525IMNTWG-H is a voltage regulator IC designed for use in various technical solutions.

  2. Q: What is the input voltage range of the NCP45525IMNTWG-H? A: The input voltage range of the NCP45525IMNTWG-H is typically between 4.5V and 28V.

  3. Q: What is the output voltage range of the NCP45525IMNTWG-H? A: The output voltage range of the NCP45525IMNTWG-H can be adjusted from 0.8V to 5.5V.

  4. Q: What is the maximum output current of the NCP45525IMNTWG-H? A: The NCP45525IMNTWG-H can provide a maximum output current of up to 5A.

  5. Q: Does the NCP45525IMNTWG-H have built-in protection features? A: Yes, the NCP45525IMNTWG-H includes overcurrent protection, thermal shutdown, and short-circuit protection.

  6. Q: Can the NCP45525IMNTWG-H operate in a wide temperature range? A: Yes, the NCP45525IMNTWG-H is designed to operate in a temperature range of -40°C to +125°C.

  7. Q: Is the NCP45525IMNTWG-H suitable for automotive applications? A: Yes, the NCP45525IMNTWG-H is AEC-Q100 qualified, making it suitable for automotive applications.

  8. Q: What is the typical efficiency of the NCP45525IMNTWG-H? A: The NCP45525IMNTWG-H has a typical efficiency of around 90% under normal operating conditions.

  9. Q: Can the NCP45525IMNTWG-H be used in battery-powered applications? A: Yes, the NCP45525IMNTWG-H can be used in battery-powered applications as it supports low-power operation.

  10. Q: Does the NCP45525IMNTWG-H require any external components for operation? A: Yes, the NCP45525IMNTWG-H requires a few external components such as input and output capacitors for stable operation.

Please note that the answers provided here are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.