ON Semiconductor
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MMBZ6V2ALT1
Lihat Detail Lembar Data

MMBZ6V2ALT1

Introduction

The MMBZ6V2ALT1 is a zener diode that belongs to the category of semiconductor devices. This component is commonly used in electronic circuits for voltage regulation and protection against overvoltage conditions. The MMBZ6V2ALT1 possesses specific characteristics, packaging, and quantity details that make it suitable for various applications.

Basic Information Overview

  • Category: Semiconductor device
  • Use: Voltage regulation and overvoltage protection
  • Characteristics: Zener diode, low leakage current, precise voltage regulation
  • Package: SOT-23
  • Essence: Voltage stabilization
  • Packaging/Quantity: Available in reels with varying quantities

Specifications

The MMBZ6V2ALT1 zener diode has the following specifications: - Voltage: 6.2V - Power Dissipation: 200mW - Operating Temperature Range: -65°C to +150°C - Zener Impedance: 40Ω - Maximum Reverse Leakage Current: 100nA

Detailed Pin Configuration

The MMBZ6V2ALT1 zener diode typically features three pins arranged in the SOT-23 package. Pin 1 is the cathode, pin 2 is the anode, and pin 3 is not connected (NC).

Functional Features

The primary function of the MMBZ6V2ALT1 zener diode is to maintain a constant voltage across its terminals, providing a stable reference voltage for electronic circuits. It exhibits low reverse leakage current and precise voltage regulation characteristics, making it suitable for use in various applications.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Low reverse leakage current
  • Small form factor
  • Wide operating temperature range

Disadvantages

  • Limited power dissipation capability
  • Vulnerable to thermal runaway under high power conditions

Working Principles

The MMBZ6V2ALT1 operates based on the principle of the zener effect, where it maintains a nearly constant voltage across its terminals when operated in the reverse breakdown region. This allows it to regulate voltage and protect sensitive components from overvoltage conditions.

Detailed Application Field Plans

The MMBZ6V2ALT1 zener diode finds application in various electronic circuits and systems, including: - Voltage regulators - Overvoltage protection circuits - Signal clamping circuits - Voltage reference circuits - Power supplies

Detailed and Complete Alternative Models

Some alternative models to the MMBZ6V2ALT1 zener diode include: - BZX84C6V2LT1G - MM3Z6V2ST1G - PZM6V2NT1G - MMSZ6V2T1G

In conclusion, the MMBZ6V2ALT1 zener diode is a crucial component in electronic circuit design, offering precise voltage regulation and overvoltage protection. Its characteristics, specifications, and application versatility make it a valuable asset in various electronic systems.

[Word count: 398]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MMBZ6V2ALT1 dalam solusi teknis

  1. What is MMBZ6V2ALT1?

    • MMBZ6V2ALT1 is a dual surface mount Zener diode with a voltage range of 5.8V to 6.4V, designed for use in voltage regulation and transient protection applications.

  2. What are the typical applications of MMBZ6V2ALT1?

    • MMBZ6V2ALT1 is commonly used in voltage clamping, voltage regulation, and transient suppression in various electronic circuits and systems.

  3. What is the maximum power dissipation of MMBZ6V2ALT1?

    • The maximum power dissipation of MMBZ6V2ALT1 is typically 200mW.

  4. What is the operating temperature range of MMBZ6V2ALT1?

    • MMBZ6V2ALT1 has an operating temperature range of -65°C to +150°C, making it suitable for a wide range of environments.

  5. What are the key features of MMBZ6V2ALT1?

    • Some key features of MMBZ6V2ALT1 include its low leakage current, high reliability, and compatibility with automated placement equipment.

  6. Can MMBZ6V2ALT1 be used for ESD protection?

    • Yes, MMBZ6V2ALT1 can be used for electrostatic discharge (ESD) protection due to its ability to clamp transient voltages and divert excess current away from sensitive components.

  7. Is MMBZ6V2ALT1 RoHS compliant?

    • Yes, MMBZ6V2ALT1 is compliant with the Restriction of Hazardous Substances (RoHS) directive, making it environmentally friendly.

  8. What are the package options available for MMBZ6V2ALT1?

    • MMBZ6V2ALT1 is available in various surface mount packages such as SOT-23 and SOT-323, providing flexibility for different design requirements.

  9. What is the reverse standoff voltage of MMBZ6V2ALT1?

    • The reverse standoff voltage of MMBZ6V2ALT1 is typically 5.8V, providing protection against overvoltage conditions.

  10. Are there any application notes or reference designs available for using MMBZ6V2ALT1 in technical solutions?

    • Yes, manufacturers often provide application notes and reference designs for incorporating MMBZ6V2ALT1 into specific technical solutions, offering guidance on circuit implementation and performance optimization.