ON Semiconductor
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MMBZ20VALT1
Lihat Detail Lembar Data

MMBZ20VALT1

Introduction

The MMBZ20VALT1 is a zener diode that belongs to the category of semiconductor devices. It is commonly used for voltage regulation and protection in electronic circuits. This entry provides an overview of the MMBZ20VALT1, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor Devices
  • Use: Voltage Regulation and Protection
  • Characteristics: Zener Diode, Low Leakage Current, High Stability
  • Package: SOT-23
  • Essence: Voltage Regulation
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Voltage - Zener (Nom) (Vz): 20V
  • Power - Max: 350mW
  • Impedance (Max) (Zzt): 30 Ohm
  • Current - Reverse Leakage @ Vr: 100nA @ 16V
  • Operating Temperature: -65°C ~ 150°C

Detailed Pin Configuration

The MMBZ20VALT1 has three pins: Cathode, Anode, and No Connection (NC). The pinout configuration is as follows: - Cathode (K): Connected to the positive terminal of the circuit. - Anode (A): Connected to the negative terminal of the circuit. - No Connection (NC): Not internally connected.

Functional Features

  • Voltage Regulation: Maintains a constant output voltage under varying load conditions.
  • Overvoltage Protection: Safeguards sensitive components by limiting the voltage across them.
  • Stability: Provides stable and reliable performance over a wide temperature range.

Advantages and Disadvantages

Advantages

  • Precise Voltage Regulation
  • Compact SOT-23 Package
  • Low Leakage Current

Disadvantages

  • Limited Power Dissipation
  • Sensitivity to Overcurrent Conditions

Working Principles

The MMBZ20VALT1 operates based on the principle of the Zener effect, where it maintains a nearly constant voltage across its terminals when reverse-biased. This allows it to regulate the voltage in a circuit and protect other components from voltage spikes.

Detailed Application Field Plans

The MMBZ20VALT1 is widely used in various applications, including: - Voltage Regulation in Power Supplies - Overvoltage Protection in Communication Systems - Signal Clipping in Audio Circuits - Voltage Reference in Sensor Interfaces

Detailed and Complete Alternative Models

Some alternative models to the MMBZ20VALT1 include: - BZX84C20: Similar 20V Zener Diode in SOT-23 Package - MM3Z20VT1G: 20V Zener Diode with Lower Leakage Current - BZT52C20S-7-F: 20V Zener Diode with Higher Power Dissipation

In conclusion, the MMBZ20VALT1 is a versatile zener diode with precise voltage regulation and overvoltage protection capabilities. Its compact package and stable performance make it suitable for a wide range of electronic applications.

Word Count: 411

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MMBZ20VALT1 dalam solusi teknis

  1. What is MMBZ20VALT1?

    • MMBZ20VALT1 is a Zener diode array designed for voltage regulation and ESD protection in various electronic circuits.

  2. What are the key features of MMBZ20VALT1?

    • The key features of MMBZ20VALT1 include three integrated Zener diodes, low leakage current, and high ESD protection.

  3. What is the typical application of MMBZ20VALT1?

    • MMBZ20VALT1 is commonly used for voltage clamping, overvoltage protection, and transient suppression in electronic circuits.

  4. What is the maximum power dissipation of MMBZ20VALT1?

    • The maximum power dissipation of MMBZ20VALT1 is typically 200mW.

  5. What is the operating voltage range of MMBZ20VALT1?

    • The operating voltage range of MMBZ20VALT1 is from 2.4V to 39V.

  6. How does MMBZ20VALT1 provide ESD protection?

    • MMBZ20VALT1 provides ESD protection by diverting transient currents away from sensitive components in the circuit.

  7. Can MMBZ20VALT1 be used in automotive applications?

    • Yes, MMBZ20VALT1 is suitable for use in automotive electronics due to its robustness and reliability.

  8. What is the package type of MMBZ20VALT1?

    • MMBZ20VALT1 is available in a small SOT-23 surface-mount package.

  9. Is MMBZ20VALT1 RoHS compliant?

    • Yes, MMBZ20VALT1 is compliant with the Restriction of Hazardous Substances (RoHS) directive.

  10. Where can I find detailed technical specifications for MMBZ20VALT1?

    • Detailed technical specifications for MMBZ20VALT1 can be found in the product datasheet provided by the manufacturer.