ON Semiconductor
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MMBTA92LT1G
Lihat Detail Lembar Data

MMBTA92LT1G

Product Overview

Category

MMBTA92LT1G belongs to the category of small signal transistors.

Use

It is commonly used for amplification and switching of electronic signals in various applications.

Characteristics

  • Low power dissipation
  • High current gain
  • Small package size

Package

The MMBTA92LT1G is typically available in a SOT-23 package.

Essence

This transistor is essential for electronic circuit design, especially in low-power applications.

Packaging/Quantity

It is usually packaged in reels with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Collector-Base Voltage: 300V
  • Maximum Collector Current: 500mA
  • Power Dissipation: 225mW
  • Transition Frequency: 250MHz

Detailed Pin Configuration

The MMBTA92LT1G has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High voltage capability
  • Fast switching speed
  • Low noise

Advantages

  • Small form factor
  • Suitable for low-power applications
  • High current gain

Disadvantages

  • Limited power dissipation capability
  • Lower transition frequency compared to some alternatives

Working Principles

The MMBTA92LT1G operates based on the principles of bipolar junction transistors, where the flow of current between the collector and emitter is controlled by the base current.

Detailed Application Field Plans

The MMBTA92LT1G is widely used in: - Audio amplifiers - Signal processing circuits - Switching circuits

Detailed and Complete Alternative Models

Some alternative models to MMBTA92LT1G include: - 2N3904 - BC547 - 2SC945

In conclusion, the MMBTA92LT1G is a small signal transistor with high voltage capability and fast switching speed, making it suitable for various low-power electronic applications. Its compact size and high current gain make it a popular choice for designers working on space-constrained projects. However, its limitations in power dissipation and transition frequency should be considered when selecting this transistor for specific applications.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MMBTA92LT1G dalam solusi teknis

  1. What is MMBTA92LT1G?

    • MMBTA92LT1G is a high-performance NPN bipolar transistor used in various electronic applications.

  2. What are the key features of MMBTA92LT1G?

    • The key features of MMBTA92LT1G include high current gain, low saturation voltage, and high transition frequency.

  3. What are the typical applications of MMBTA92LT1G?

    • MMBTA92LT1G is commonly used in audio amplifiers, switching circuits, and general-purpose amplification.

  4. What is the maximum collector current for MMBTA92LT1G?

    • The maximum collector current for MMBTA92LT1G is typically around 500mA.

  5. What is the maximum power dissipation for MMBTA92LT1G?

    • The maximum power dissipation for MMBTA92LT1G is usually around 300mW.

  6. What is the voltage rating for MMBTA92LT1G?

    • The voltage rating for MMBTA92LT1G is typically around 40V.

  7. Is MMBTA92LT1G suitable for high-frequency applications?

    • Yes, MMBTA92LT1G has a high transition frequency, making it suitable for high-frequency applications.

  8. Does MMBTA92LT1G require a heat sink?

    • For high-power applications or when operating at high currents, a heat sink may be necessary to dissipate heat effectively.

  9. Can MMBTA92LT1G be used in low-noise amplifier circuits?

    • Yes, MMBTA92LT1G can be used in low-noise amplifier circuits due to its low saturation voltage and high current gain.

  10. Are there any specific layout considerations for using MMBTA92LT1G in a circuit?

    • It is important to minimize lead lengths and keep input and output traces short to reduce parasitic effects and maintain signal integrity when using MMBTA92LT1G in a circuit.