ON Semiconductor
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MM3Z36VT1
Lihat Detail Lembar Data

MM3Z36VT1

Product Overview

Category

The MM3Z36VT1 belongs to the category of Zener diodes.

Use

It is commonly used for voltage regulation and protection in electronic circuits.

Characteristics

  • Voltage: 36V
  • Power Dissipation: 200mW
  • Package: SOD-323
  • Operating Temperature Range: -65°C to +150°C

Packaging/Quantity

The MM3Z36VT1 is typically available in tape and reel packaging with a quantity of 3000 units per reel.

Specifications

  • Zener Voltage: 36V
  • Tolerance: ±5%
  • Reverse Leakage Current: 100nA
  • Maximum Zener Impedance: 40Ω

Detailed Pin Configuration

The MM3Z36VT1 has three pins: 1. Cathode (K) 2. Anode (A) 3. Not connected (NC)

Functional Features

  • Precise voltage regulation
  • Low reverse leakage current
  • Small form factor

Advantages and Disadvantages

Advantages

  • Accurate voltage regulation
  • Small package size
  • Low power dissipation

Disadvantages

  • Limited power handling capability
  • Sensitivity to temperature variations

Working Principles

The MM3Z36VT1 operates based on the principle of the Zener effect, where it maintains a constant voltage across its terminals when it is operated in the reverse breakdown region.

Detailed Application Field Plans

The MM3Z36VT1 is widely used in various applications such as: - Voltage regulation in power supplies - Overvoltage protection in electronic circuits - Signal clamping and limiting

Detailed and Complete Alternative Models

Some alternative models to MM3Z36VT1 include: - BZX84C36 - 1N4729A - MMSZ36T1G

In conclusion, the MM3Z36VT1 Zener diode offers precise voltage regulation and protection in a compact package, making it suitable for a wide range of electronic applications.

[Word count: 298]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MM3Z36VT1 dalam solusi teknis

  1. What is the MM3Z36VT1?

    • The MM3Z36VT1 is a Zener diode with a voltage of 36V and a power dissipation of 200mW, commonly used in voltage regulation and protection circuits.

  2. What are the typical applications of MM3Z36VT1?

    • It is commonly used in voltage regulation, overvoltage protection, and signal clamping applications in various electronic circuits.

  3. What is the maximum current that MM3Z36VT1 can handle?

    • The MM3Z36VT1 has a maximum continuous current rating of 5mA.

  4. How does MM3Z36VT1 provide overvoltage protection?

    • When the input voltage exceeds the Zener voltage (36V), the MM3Z36VT1 conducts and limits the voltage across the circuit to its rated value, protecting downstream components.

  5. Can MM3Z36VT1 be used for voltage reference applications?

    • Yes, it can be used as a stable voltage reference due to its precise Zener voltage characteristics.

  6. What are the key electrical characteristics of MM3Z36VT1?

    • Some key characteristics include a Zener voltage of 36V, a tolerance of ±5%, and a low dynamic impedance.

  7. Is MM3Z36VT1 suitable for high-frequency applications?

    • While it can function at moderate frequencies, it may not be ideal for very high-frequency applications due to its inherent capacitance and response time.

  8. What are the package options available for MM3Z36VT1?

    • The MM3Z36VT1 is available in various surface mount packages such as SOD-323 and SOD-523.

  9. Can MM3Z36VT1 be used in automotive electronics?

    • Yes, it can be used in automotive electronics for voltage regulation and protection against voltage transients.

  10. Are there any precautions to consider when using MM3Z36VT1 in a circuit?

    • It's important to ensure proper heat dissipation and current limiting to stay within the specified ratings. Additionally, attention should be given to the orientation and placement of the diode in the circuit to ensure proper functionality.