ON Semiconductor
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MJE171
Lihat Detail Lembar Data

MJE171 Transistor

Product Overview

Category:

The MJE171 transistor belongs to the category of bipolar junction transistors (BJT).

Use:

It is commonly used as a general-purpose NPN transistor in electronic circuits.

Characteristics:

  • High current gain
  • Low saturation voltage
  • Fast switching speed

Package:

The MJE171 is typically available in a TO-220 package.

Essence:

This transistor is essential for amplification and switching applications in various electronic devices.

Packaging/Quantity:

The MJE171 is usually packaged individually and is available in varying quantities depending on the supplier.

Specifications

  • Collector-Base Voltage: 40V
  • Collector-Emitter Voltage: 40V
  • Emitter-Base Voltage: 5V
  • Collector Current: 4A
  • Power Dissipation: 50W
  • Transition Frequency: 2MHz

Detailed Pin Configuration

The MJE171 transistor has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High current gain allows for efficient amplification.
  • Low saturation voltage enables fast switching between on and off states.
  • Suitable for use in audio amplifiers, power switches, and voltage regulators.

Advantages and Disadvantages

Advantages

  • High current gain for effective signal amplification.
  • Low saturation voltage for rapid switching applications.

Disadvantages

  • Moderate transition frequency may limit high-frequency applications.

Working Principles

The MJE171 operates based on the principles of controlling current flow through the base terminal to regulate the larger current flowing between the collector and emitter terminals.

Detailed Application Field Plans

The MJE171 transistor finds application in various electronic circuits, including: - Audio amplifiers - Power supply regulators - Switching circuits

Detailed and Complete Alternative Models

Some alternative models to the MJE171 transistor include: - 2N3055 - TIP31 - BD139

In conclusion, the MJE171 transistor is a versatile component with high current gain and low saturation voltage, making it suitable for a wide range of amplification and switching applications in electronic circuits.

[Word Count: 278]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MJE171 dalam solusi teknis

  1. What is MJE171?

    • MJE171 is a high-voltage, high-speed NPN transistor commonly used in electronic circuits for amplification and switching applications.

  2. What are the typical applications of MJE171?

    • MJE171 is often used in audio amplifiers, power supplies, motor control circuits, and other high-voltage switching applications.

  3. What are the key specifications of MJE171?

    • The MJE171 transistor typically has a collector-emitter voltage (Vce) of 250V, a collector current (Ic) of 4A, and a maximum power dissipation (Pd) of 50W.

  4. How do I determine the appropriate biasing and operating conditions for MJE171 in a specific circuit?

    • The biasing and operating conditions for MJE171 can be determined using its datasheet, which provides information on recommended operating ranges, maximum ratings, and typical performance characteristics.

  5. What are the important considerations when designing a circuit with MJE171?

    • It's crucial to consider the voltage and current requirements of the circuit, thermal management, and ensuring proper heatsinking for the transistor to prevent overheating.

  6. Can MJE171 be used in high-frequency applications?

    • While MJE171 is not specifically designed for high-frequency applications, it can still be used in moderate frequency ranges with appropriate circuit design and layout considerations.

  7. Are there any common failure modes or issues associated with MJE171?

    • Common failure modes include thermal runaway due to inadequate heatsinking, exceeding maximum ratings, or improper biasing.

  8. What are some alternative transistors that can be used if MJE171 is not available?

    • Alternatives to MJE171 include similar high-voltage, high-speed NPN transistors such as TIP31, TIP32, or 2N3055, depending on the specific application requirements.

  9. How can I ensure the reliability and stability of MJE171 in my circuit design?

    • Ensuring proper thermal management, adhering to the recommended operating conditions, and conducting thorough testing and validation are essential for ensuring reliability and stability.

  10. Where can I purchase MJE171 transistors for my project?

    • MJE171 transistors can be purchased from various electronic component distributors, both online and at physical stores. It's important to verify the authenticity and quality of the components before making a purchase.