ON Semiconductor
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MC74HC4040AFG
Lihat Detail Lembar Data

MC74HC4040AFG

Product Overview

Category

MC74HC4040AFG belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a binary ripple counter.

Characteristics

  • High-speed operation
  • Wide operating voltage range
  • Low power consumption
  • Schmitt trigger inputs for noise immunity
  • Buffered outputs for cascading

Package

MC74HC4040AFG is available in a small outline package (SOP) with 16 pins.

Essence

The essence of MC74HC4040AFG lies in its ability to count binary signals and provide accurate timing control in various electronic applications.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel.

Specifications

  • Supply Voltage: 2V to 6V
  • Maximum Clock Frequency: 25 MHz
  • Number of Stages: 12
  • Output Type: Buffered
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VCC: Positive supply voltage
  2. Q12: Output of the twelfth stage
  3. Q11: Output of the eleventh stage
  4. Q10: Output of the tenth stage
  5. Q9: Output of the ninth stage
  6. Q8: Output of the eighth stage
  7. Q7: Output of the seventh stage
  8. GND: Ground reference
  9. Q6: Output of the sixth stage
  10. Q5: Output of the fifth stage
  11. Q4: Output of the fourth stage
  12. Q3: Output of the third stage
  13. Q2: Output of the second stage
  14. Q1: Output of the first stage
  15. MR: Master reset input
  16. CP: Clock input

Functional Features

  • Binary ripple counter with 12 stages
  • Asynchronous master reset for clearing the counter
  • Buffered outputs for cascading multiple counters
  • Schmitt trigger inputs for noise immunity
  • High-speed operation for accurate timing control

Advantages and Disadvantages

Advantages

  • Wide operating voltage range allows compatibility with various systems
  • Low power consumption for energy-efficient designs
  • Schmitt trigger inputs provide noise immunity, ensuring reliable operation
  • Buffered outputs enable easy cascading of multiple counters

Disadvantages

  • Limited number of stages (12) may not be sufficient for certain applications requiring higher counts
  • Not suitable for high-frequency applications due to its maximum clock frequency limitation

Working Principles

MC74HC4040AFG operates as a binary ripple counter, where each stage represents a binary digit. The counter advances by one on each rising edge of the clock input (CP). The outputs (Q1-Q12) represent the binary count, with Q1 being the least significant bit and Q12 being the most significant bit. The counter can be cleared to zero by applying a low signal to the master reset input (MR).

Detailed Application Field Plans

MC74HC4040AFG finds applications in various fields, including: - Digital frequency division - Time delay generation - Event counting - Frequency synthesis - Data encoding/decoding

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MC74HC4040AFG are: - CD4040BE - SN74HC4040N - HEF4040BP - HCF4040BE

These alternatives can be considered based on specific requirements and availability.

Word count: 498 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MC74HC4040AFG dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of MC74HC4040AFG in technical solutions:

  1. Q: What is MC74HC4040AFG? A: MC74HC4040AFG is a high-speed CMOS 12-stage binary counter with an asynchronous reset.

  2. Q: What are the typical applications of MC74HC4040AFG? A: MC74HC4040AFG is commonly used in frequency division, time delay generation, and event sequencing applications.

  3. Q: What is the maximum clock frequency supported by MC74HC4040AFG? A: The maximum clock frequency supported by MC74HC4040AFG is typically around 50 MHz.

  4. Q: How many output stages does MC74HC4040AFG have? A: MC74HC4040AFG has 12 output stages, which can be used for various purposes depending on the application.

  5. Q: Can MC74HC4040AFG be cascaded to achieve higher counting stages? A: Yes, MC74HC4040AFG can be cascaded with other counters to achieve higher counting stages if needed.

  6. Q: What is the power supply voltage range for MC74HC4040AFG? A: The power supply voltage range for MC74HC4040AFG is typically between 2V and 6V.

  7. Q: Does MC74HC4040AFG have any built-in error detection or correction features? A: No, MC74HC4040AFG does not have any built-in error detection or correction features. It is a simple counter.

  8. Q: Can MC74HC4040AFG operate in both synchronous and asynchronous modes? A: Yes, MC74HC4040AFG can operate in both synchronous and asynchronous modes, depending on the application requirements.

  9. Q: What is the typical propagation delay of MC74HC4040AFG? A: The typical propagation delay of MC74HC4040AFG is around 15 ns.

  10. Q: Is MC74HC4040AFG available in different package options? A: Yes, MC74HC4040AFG is available in various package options, such as SOIC, TSSOP, and PDIP, to suit different design needs.

Please note that the specific details and specifications may vary depending on the manufacturer and datasheet of MC74HC4040AFG.