Category: Integrated Circuit (IC)
Use: The MC74HC175ADR2 is a quad D-type flip-flop with clear, designed for general-purpose storage applications in digital systems. It can store and transfer data in electronic devices.
Characteristics: - High-speed operation - Wide operating voltage range - Low power consumption - Schmitt-trigger inputs for noise immunity - Direct interface with TTL levels - Complementary outputs - Clear input to reset all flip-flops
Package: SOIC-16 (Small Outline Integrated Circuit), which is a surface-mount package with 16 pins.
Essence: The MC74HC175ADR2 is an essential component in digital systems that require reliable storage and transfer of data. It provides a compact and efficient solution for storing information in electronic devices.
Packaging/Quantity: The MC74HC175ADR2 is typically packaged in reels or tubes, containing a quantity of 250 units per reel/tube.
The MC74HC175ADR2 has a total of 16 pins, each serving a specific function:
Advantages: - High-speed operation facilitates fast data processing - Wide operating voltage range enhances versatility - Low power consumption contributes to energy efficiency - Noise immunity provided by Schmitt-trigger inputs improves reliability - Direct interface with TTL levels simplifies integration - Complementary outputs offer flexibility in signal routing
Disadvantages: - Limited maximum operating frequency compared to some alternative models - Propagation delay time may impact real-time applications with strict timing requirements
The MC74HC175ADR2 operates based on the principles of flip-flops, which are electronic circuits capable of storing and transferring binary information. It utilizes D-type flip-flops, which store data based on the clock signal and transfer it to the output when triggered.
The clear input allows for resetting all flip-flops simultaneously, ensuring a known initial state. The complementary outputs provide inverted versions of the stored data, allowing for flexible signal routing within the system.
The MC74HC175ADR2 finds applications in various digital systems that require reliable data storage and transfer. Some specific application fields include:
These alternative models offer similar functionality and can be considered as substitutes for the MC74HC175ADR2 based on specific requirements and availability.
Word count: 615 words
Sure! Here are 10 common questions and answers related to the application of MC74HC175ADR2 in technical solutions:
Q: What is MC74HC175ADR2? A: MC74HC175ADR2 is a quad D-type flip-flop integrated circuit (IC) that can store and manipulate digital data.
Q: What is the operating voltage range for MC74HC175ADR2? A: The operating voltage range for MC74HC175ADR2 is typically between 2V and 6V.
Q: How many flip-flops are there in MC74HC175ADR2? A: MC74HC175ADR2 contains four independent D-type flip-flops.
Q: What is the maximum clock frequency supported by MC74HC175ADR2? A: MC74HC175ADR2 can support clock frequencies up to 25 MHz.
Q: Can MC74HC175ADR2 be used for edge-triggered or level-triggered applications? A: MC74HC175ADR2 is primarily designed for edge-triggered applications, but it can also be used for level-triggered applications with appropriate circuit design.
Q: What is the output drive capability of MC74HC175ADR2? A: MC74HC175ADR2 has a standard output drive capability of 4 mA.
Q: Is MC74HC175ADR2 compatible with other logic families? A: Yes, MC74HC175ADR2 is compatible with other CMOS logic families and can interface with TTL logic devices.
Q: Can MC74HC175ADR2 operate in both synchronous and asynchronous modes? A: Yes, MC74HC175ADR2 can operate in both synchronous and asynchronous modes, depending on the clock input.
Q: What is the typical power consumption of MC74HC175ADR2? A: The typical power consumption of MC74HC175ADR2 is low, making it suitable for battery-powered applications.
Q: Can MC74HC175ADR2 be used in high-speed data storage applications? A: Yes, MC74HC175ADR2 can be used in high-speed data storage applications due to its fast propagation delay and setup/hold times.
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.