ON Semiconductor
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MC34071ADR2
Lihat Detail Lembar Data

MC34071ADR2

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: High-performance, low-power, single supply voltage, wide operating temperature range
  • Package: SOIC-8 (Small Outline Integrated Circuit), DIP-8 (Dual Inline Package)
  • Essence: The MC34071ADR2 is a high-performance operational amplifier designed for a wide range of applications.
  • Packaging/Quantity: Available in reels or tubes, with varying quantities depending on the supplier.

Specifications

  • Supply Voltage: 3V to 44V
  • Input Offset Voltage: 1.5mV (maximum)
  • Input Bias Current: 250nA (maximum)
  • Slew Rate: 13V/µs (typical)
  • Gain Bandwidth Product: 4MHz (typical)
  • Operating Temperature Range: -40°C to +105°C

Pin Configuration

The MC34071ADR2 has a standard pin configuration as follows:

___________ Vcc | 1 8 | Vout Vin-| 2 7 | NC Vin+| 3 6 | NC Gnd | 4 5 | NC ‾‾‾‾‾‾‾‾‾‾‾‾

Functional Features

  • High open-loop gain
  • Low input offset voltage and bias current
  • Wide bandwidth and fast slew rate
  • Unity-gain stable
  • Low total harmonic distortion
  • Protection against output short-circuits

Advantages and Disadvantages

Advantages: - High performance and precision - Wide operating voltage range - Suitable for single-supply applications - Low power consumption

Disadvantages: - Limited output current capability - Not suitable for high-frequency applications

Working Principles

The MC34071ADR2 is a voltage-feedback operational amplifier that amplifies the difference between its two input terminals. It operates on a single supply voltage and provides a high gain, making it suitable for various signal conditioning applications.

Application Field Plans

The MC34071ADR2 can be used in a wide range of applications, including: 1. Audio amplifiers 2. Active filters 3. Instrumentation amplifiers 4. Voltage regulators 5. Signal generators 6. Sensor interfaces

Alternative Models

Here are some alternative models that can be considered as replacements for the MC34071ADR2: 1. LM741 2. TL071 3. OP07 4. AD711 5. LT1498

These alternatives offer similar functionality and performance characteristics.

In conclusion, the MC34071ADR2 is a versatile operational amplifier with high performance and precision. Its wide operating voltage range and low power consumption make it suitable for various applications. However, it has limited output current capability and may not be ideal for high-frequency applications.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MC34071ADR2 dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of MC34071ADR2 in technical solutions:

  1. Q: What is MC34071ADR2? A: MC34071ADR2 is a high-performance operational amplifier (op-amp) that can be used in various electronic applications.

  2. Q: What is the voltage supply range for MC34071ADR2? A: The voltage supply range for MC34071ADR2 is typically between ±4V and ±18V.

  3. Q: What is the maximum output current of MC34071ADR2? A: The maximum output current of MC34071ADR2 is approximately 40mA.

  4. Q: Can MC34071ADR2 operate in single-supply mode? A: Yes, MC34071ADR2 can operate in single-supply mode, as long as the voltage supply is within the specified range.

  5. Q: What is the bandwidth of MC34071ADR2? A: The bandwidth of MC34071ADR2 is typically around 4MHz.

  6. Q: Is MC34071ADR2 suitable for low-power applications? A: No, MC34071ADR2 is not specifically designed for low-power applications. It is more suitable for high-performance applications.

  7. Q: Can MC34071ADR2 be used as a comparator? A: Yes, MC34071ADR2 can be used as a comparator, but it is primarily designed as an op-amp.

  8. Q: Does MC34071ADR2 have built-in protection features? A: No, MC34071ADR2 does not have built-in protection features. External protection circuitry may be required depending on the application.

  9. Q: What is the input offset voltage of MC34071ADR2? A: The input offset voltage of MC34071ADR2 is typically around 3mV.

  10. Q: Can MC34071ADR2 be used in audio applications? A: Yes, MC34071ADR2 can be used in audio applications such as preamplifiers and audio mixers, thanks to its high bandwidth and low distortion characteristics.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.