Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MC100LVEL51DTG

MC100LVEL51DTG

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Level Translator
  • Characteristics: High-speed, low-voltage differential signaling (LVDS) translator
  • Package: 8-pin TSSOP (Thin Shrink Small Outline Package)
  • Essence: Translates signals between different logic voltage levels
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Supply Voltage: 2.375V to 3.8V
  • Input Voltage Range: -2V to VCC + 2V
  • Output Voltage Range: -2V to VCC + 2V
  • Propagation Delay: 0.7 ns (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MC100LVEL51DTG has the following pin configuration:

  1. VCC - Power supply voltage
  2. GND - Ground reference
  3. Q0 - Output 0
  4. Q1 - Output 1
  5. Q2 - Output 2
  6. Q3 - Output 3
  7. /Q0 - Complementary output of Q0
  8. /Q1 - Complementary output of Q1

Functional Features

  • Translates LVDS signals to TTL/CMOS logic levels
  • Supports high-speed data transmission up to 1.5 Gbps
  • Provides low skew and jitter characteristics
  • Compatible with various LVDS standards
  • Offers differential inputs for noise immunity

Advantages and Disadvantages

Advantages: - High-speed signal translation - Low power consumption - Wide operating temperature range - Compact package size

Disadvantages: - Requires external biasing resistors for proper operation - Limited voltage range compatibility

Working Principles

The MC100LVEL51DTG is a logic level translator designed to convert LVDS signals to TTL/CMOS logic levels. It utilizes differential signaling to achieve high-speed data transmission while minimizing noise interference. The device operates by comparing the differential input voltage with a reference voltage and generating corresponding output logic levels.

Detailed Application Field Plans

The MC100LVEL51DTG is commonly used in applications that require the translation of LVDS signals to TTL/CMOS logic levels. Some typical application fields include:

  1. Communication Systems: Used in high-speed data communication interfaces, such as Ethernet and Fibre Channel.
  2. Display Technology: Enables LVDS-based display panels to interface with TTL/CMOS controllers.
  3. Industrial Automation: Facilitates signal conversion between LVDS sensors and microcontrollers.
  4. Test and Measurement Equipment: Provides signal translation capabilities for accurate data acquisition.

Detailed and Complete Alternative Models

  1. SN65LVDS31: LVDS to CMOS/TTL translator with similar specifications and pin configuration.
  2. MAX9126: High-speed LVDS to CMOS/TTL translator with enhanced ESD protection.
  3. DS90LV019: Differential line receiver/transmitter supporting LVDS to CMOS/TTL translation.

Note: This is not an exhaustive list, and there are several alternative models available in the market.

Word count: 410 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MC100LVEL51DTG dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of MC100LVEL51DTG in technical solutions:

  1. Q: What is MC100LVEL51DTG? A: MC100LVEL51DTG is a high-speed differential receiver designed for use in ECL systems.

  2. Q: What is the operating voltage range of MC100LVEL51DTG? A: The operating voltage range of MC100LVEL51DTG is typically between -4.2V and -5.7V.

  3. Q: What is the maximum data rate supported by MC100LVEL51DTG? A: MC100LVEL51DTG can support data rates up to 1.6 Gbps.

  4. Q: Can MC100LVEL51DTG be used in both single-ended and differential applications? A: No, MC100LVEL51DTG is specifically designed for differential applications.

  5. Q: What is the input sensitivity of MC100LVEL51DTG? A: The input sensitivity of MC100LVEL51DTG is typically 50 mV.

  6. Q: Does MC100LVEL51DTG have built-in termination resistors? A: No, MC100LVEL51DTG does not have built-in termination resistors. External termination resistors are required.

  7. Q: What is the output swing of MC100LVEL51DTG? A: The output swing of MC100LVEL51DTG is typically 800 mV.

  8. Q: Is MC100LVEL51DTG compatible with other ECL devices? A: Yes, MC100LVEL51DTG is compatible with other ECL devices that operate on similar voltage levels.

  9. Q: Can MC100LVEL51DTG be used in high-speed communication systems? A: Yes, MC100LVEL51DTG is suitable for use in high-speed communication systems such as data transmission and networking.

  10. Q: What is the package type of MC100LVEL51DTG? A: MC100LVEL51DTG is available in a 8-pin SOIC (Small Outline Integrated Circuit) package.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.