Lihat spesifikasi untuk detail produk.
MC100EL39DWR2G
Product Overview
- Category: Integrated Circuit (IC)
- Use: Signal Conditioning and Clock Distribution
- Characteristics: High-speed, Low-power, Differential Receiver
- Package: SOIC-20
- Essence: The MC100EL39DWR2G is a high-performance differential receiver designed for signal conditioning and clock distribution applications.
- Packaging/Quantity: Available in tape and reel packaging with 2500 units per reel.
Specifications
- Supply Voltage: -4.2V to -5.7V
- Input Voltage Range: -3.0V to -5.7V
- Output Voltage Swing: -1.8V to -4.0V
- Propagation Delay: 350 ps
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The MC100EL39DWR2G has a total of 20 pins arranged as follows:
Pin 1: VCC
Pin 2: Q0
Pin 3: Q1
Pin 4: Q2
Pin 5: Q3
Pin 6: Q4
Pin 7: Q5
Pin 8: GND
Pin 9: Q6
Pin 10: Q7
Pin 11: Q8
Pin 12: Q9
Pin 13: Q10
Pin 14: Q11
Pin 15: Q12
Pin 16: Q13
Pin 17: Q14
Pin 18: Q15
Pin 19: Q16
Pin 20: Q17
Functional Features
- High-speed differential receiver
- Low-power consumption
- Wide input voltage range
- Compatible with ECL logic levels
- Differential input and single-ended output
Advantages and Disadvantages
Advantages: - High-speed operation - Low power consumption - Wide input voltage range allows compatibility with various signal sources - Differential input provides noise immunity
Disadvantages: - Requires negative supply voltage - Limited output voltage swing
Working Principles
The MC100EL39DWR2G operates by receiving a differential input signal and converting it into a single-ended output. It is designed to provide high-speed signal conditioning and clock distribution in applications where precise timing and synchronization are critical. The device operates using ECL logic levels and requires a negative supply voltage for proper functionality.
Detailed Application Field Plans
The MC100EL39DWR2G can be used in various applications, including:
- Telecommunications: Clock distribution in high-speed data transmission systems.
- Networking: Signal conditioning in network switches and routers.
- Industrial Automation: Synchronization of control signals in industrial automation systems.
- Test and Measurement: Precision timing and signal conditioning in test equipment.
- Data Centers: Clock distribution and signal conditioning in data center infrastructure.
Detailed and Complete Alternative Models
- MC100EL38DWR2G: Differential receiver with similar characteristics but different pin configuration.
- MC100EL37DWR2G: Differential receiver with lower propagation delay and wider temperature range.
- MC100EL36DWR2G: Differential receiver with higher output voltage swing and lower power consumption.
These alternative models offer similar functionality and can be considered based on specific application requirements.
Word count: 345 words
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MC100EL39DWR2G dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of MC100EL39DWR2G in technical solutions:
Q: What is MC100EL39DWR2G? A: MC100EL39DWR2G is a differential receiver IC (integrated circuit) designed for high-speed data transmission applications.
Q: What is the maximum data rate supported by MC100EL39DWR2G? A: MC100EL39DWR2G supports data rates up to 3.8 Gbps, making it suitable for high-speed communication systems.
Q: What is the input voltage range of MC100EL39DWR2G? A: The input voltage range of MC100EL39DWR2G is -4 V to -5.5 V, which allows for compatibility with various signal levels.
Q: Can MC100EL39DWR2G be used in both single-ended and differential signaling applications? A: No, MC100EL39DWR2G is specifically designed for differential signaling applications and does not support single-ended signaling.
Q: What is the output swing of MC100EL39DWR2G? A: The output swing of MC100EL39DWR2G is typically ±800 mV, ensuring reliable signal transmission over long distances.
Q: Does MC100EL39DWR2G have built-in termination resistors? A: No, MC100EL39DWR2G does not have built-in termination resistors. External termination resistors are required for proper operation.
Q: What is the power supply voltage range for MC100EL39DWR2G? A: MC100EL39DWR2G operates with a power supply voltage range of -4.2 V to -5.7 V.
Q: Can MC100EL39DWR2G be used in low-power applications? A: No, MC100EL39DWR2G is not optimized for low-power applications and may consume relatively higher power compared to low-power alternatives.
Q: Is MC100EL39DWR2G compatible with other ECL (Emitter-Coupled Logic) devices? A: Yes, MC100EL39DWR2G is compatible with other ECL devices, allowing for seamless integration into existing ECL-based systems.
Q: What is the operating temperature range of MC100EL39DWR2G? A: MC100EL39DWR2G can operate within a temperature range of -40°C to +85°C, making it suitable for various environmental conditions.
Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.