ON Semiconductor
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
KSA1381ES
Lihat Detail Lembar Data

KSA1381ES

Product Overview

Category

The KSA1381ES belongs to the category of PNP Epitaxial Silicon Transistors.

Use

It is commonly used as an amplifier in various electronic circuits.

Characteristics

  • Low noise figure
  • High breakdown voltage
  • High current capability

Package

The KSA1381ES comes in a TO-92 package.

Essence

This transistor is essential for amplifying weak signals in electronic devices.

Packaging/Quantity

It is typically available in reels with a quantity of 2000 units per reel.

Specifications

  • Collector-Emitter Voltage: -50V
  • Collector Current: -0.1A
  • Power Dissipation: 0.4W
  • Transition Frequency: 150MHz
  • Noise Figure: 0.6dB

Detailed Pin Configuration

  1. Emitter
  2. Base
  3. Collector

Functional Features

  • High gain
  • Low distortion
  • Wide frequency response

Advantages and Disadvantages

Advantages

  • Low noise figure
  • High breakdown voltage
  • Suitable for low-power applications

Disadvantages

  • Limited collector current capability
  • Relatively low transition frequency

Working Principles

The KSA1381ES operates based on the principles of bipolar junction transistors, where the flow of current is controlled by the biasing of the base terminal.

Detailed Application Field Plans

The KSA1381ES is widely used in audio amplifiers, signal processing circuits, and low-power electronic systems due to its low noise figure and high gain characteristics.

Detailed and Complete Alternative Models

Some alternative models to the KSA1381ES include: - BC557B - 2N3906 - S8550

In conclusion, the KSA1381ES is a versatile PNP transistor with excellent low-noise performance and high breakdown voltage, making it suitable for various low-power amplification applications.

[Word count: 258]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan KSA1381ES dalam solusi teknis

  1. What is the KSA1381ES transistor used for?

    • The KSA1381ES is commonly used as a high-voltage, high-current PNP transistor in various electronic circuits and technical solutions.

  2. What are the key specifications of the KSA1381ES transistor?

    • The KSA1381ES has a maximum collector-emitter voltage of 160V, a collector current of 3A, and a power dissipation of 25W.

  3. Can the KSA1381ES be used for audio amplifier applications?

    • Yes, the KSA1381ES is suitable for use in audio amplifier circuits due to its high voltage and current capabilities.

  4. How should the KSA1381ES be connected in a typical circuit?

    • The KSA1381ES is typically connected in common emitter configuration in electronic circuits.

  5. What are the typical applications of the KSA1381ES transistor?

    • The KSA1381ES is commonly used in power supply circuits, audio amplifiers, motor control circuits, and other high-power applications.

  6. What are the recommended operating conditions for the KSA1381ES?

    • The KSA1381ES operates within a temperature range of -55°C to 150°C and requires proper heat sinking for higher power applications.

  7. Is the KSA1381ES suitable for switching applications?

    • Yes, the KSA1381ES can be used in switching applications due to its high voltage and current ratings.

  8. Are there any specific considerations for driving the KSA1381ES in a circuit?

    • It is important to ensure proper base current and voltage levels when driving the KSA1381ES to achieve optimal performance and reliability.

  9. What are the common failure modes of the KSA1381ES transistor?

    • Common failure modes include thermal runaway due to inadequate heat dissipation and overvoltage/current stress leading to breakdown.

  10. Where can I find detailed application notes for using the KSA1381ES in technical solutions?

    • Detailed application notes and circuit examples for the KSA1381ES can be found in the manufacturer's datasheet and application guides.