CAT28F010HR-12T

Product Overview

Category

The CAT28F010HR-12T belongs to the category of non-volatile memory devices.

Use

It is primarily used for storing and retrieving data in electronic systems.

Characteristics

• Non-volatile: The CAT28F010HR-12T retains stored data even when power is removed.
• High capacity: It has a storage capacity of 1 megabit (128 kilobytes).
• High-speed operation: The device operates at a speed of 12 nanoseconds.
• Low power consumption: It consumes minimal power during read and write operations.

Package

The CAT28F010HR-12T is available in a standard 32-pin plastic dual in-line package (PDIP).

Essence

The essence of CAT28F010HR-12T lies in its ability to provide reliable and non-volatile storage for electronic systems.

Packaging/Quantity

The device is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of CAT28F010HR-12T chips.

Specifications

• Memory Capacity: 1 Megabit (128 Kilobytes)
• Operating Speed: 12 Nanoseconds
• Supply Voltage: 5 Volts
• Interface: Parallel
• Package Type: 32-Pin PDIP

Detailed Pin Configuration

The CAT28F010HR-12T has a total of 32 pins. The pin configuration is as follows:

1. VPP - Programming Voltage
2. A0-A16 - Address Inputs
3. DQ0-DQ7 - Data Inputs/Outputs
4. CE - Chip Enable
5. OE - Output Enable
6. WE - Write Enable
7. RESET - Reset Input
8. VCC - Power Supply
9. GND - Ground

Functional Features

• High-speed read and write operations
• Low power consumption during operation
• Reliable data retention even in the absence of power
• Easy integration into existing electronic systems

Advantages and Disadvantages

Advantages

• Non-volatile memory ensures data integrity
• High storage capacity for various applications
• Fast access times for efficient data retrieval
• Low power consumption for energy-efficient operation

Disadvantages

• Limited storage capacity compared to newer memory technologies
• Parallel interface may limit compatibility with certain systems
• Relatively slower write speeds compared to some modern memory devices

Working Principles

The CAT28F010HR-12T utilizes flash memory technology to store and retrieve data. It employs a combination of floating-gate transistors and charge storage mechanisms to retain information even when power is removed. The device uses an address bus, data bus, and control signals to facilitate read and write operations.

Detailed Application Field Plans

The CAT28F010HR-12T finds application in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices

Detailed and Complete Alternative Models

1. CAT28F010HT-15T: Similar to CAT28F010HR-12T, but with a higher operating speed of 15 nanoseconds.
2. CAT28F010HR-20T: Similar to CAT28F010HR-12T, but with a lower operating speed of 20 nanoseconds.
3. CAT28F010HR-25T: Similar to CAT28F010HR-12T, but with a lower operating speed of 25 nanoseconds.
4. CAT28F010HR-10T: Similar to CAT28F010HR-12T, but with a higher operating speed of 10 nanoseconds.

These alternative models offer different operating speeds to cater to specific application requirements.

In conclusion, the CAT28F010HR-12T is a non-volatile memory device with a storage capacity of 1 megabit. It offers high-speed operation, low power consumption, and reliable data retention. The device finds application in various electronic systems and has alternative models with different operating speeds to suit specific needs.