ON Semiconductor
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
BD435
Lihat Detail Lembar Data

BD435 Transistor: Encyclopedia Entry

Introduction

The BD435 transistor is a crucial component in electronic circuits, belonging to the category of power transistors. This entry provides an overview of the BD435 transistor, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Power Transistor
  • Use: Amplification and switching applications
  • Characteristics: High current and voltage ratings, low saturation voltage
  • Package: TO-126
  • Essence: NPN silicon epitaxial-base planar type transistor
  • Packaging/Quantity: Typically available in packs of 10 or 25 units

Specifications

  • Collector-Emitter Voltage (VCEO): 45V
  • Collector-Base Voltage (VCBO): 45V
  • Emitter-Base Voltage (VEBO): 5V
  • Collector Current (IC): 4A
  • Power Dissipation (PD): 36W
  • Transition Frequency (FT): 2MHz
  • Operating Temperature Range: -65°C to 150°C

Detailed Pin Configuration

The BD435 transistor has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High current gain
  • Low saturation voltage
  • Fast switching speed
  • Good linearity in amplification applications

Advantages and Disadvantages

Advantages

  • Suitable for high-power applications
  • Robust construction
  • Wide operating temperature range

Disadvantages

  • Relatively larger package size
  • Limited frequency response compared to smaller signal transistors

Working Principles

The BD435 operates based on the principles of bipolar junction transistors (BJTs), where the flow of current between the collector and emitter is controlled by the base current. It amplifies or switches electronic signals in various circuit configurations.

Detailed Application Field Plans

The BD435 transistor finds extensive use in the following applications: - Audio amplifiers - Power supply circuits - Motor control circuits - LED drivers - Voltage regulators

Detailed and Complete Alternative Models

Some alternative models to the BD435 transistor include: - TIP31C - 2N3055 - MJ2955 - MJE13005

In conclusion, the BD435 transistor serves as a reliable and versatile component in electronic circuits, offering high current and voltage ratings along with fast switching characteristics. Its robust design and wide application field make it a popular choice for various electronic projects.

Word Count: 315

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan BD435 dalam solusi teknis

  1. What is BD435?

    • BD435 is a PNP silicon power transistor used in various electronic applications.

  2. What are the typical applications of BD435?

    • BD435 is commonly used in audio amplifiers, voltage regulators, and power management circuits.

  3. What is the maximum collector current for BD435?

    • The maximum collector current for BD435 is 4A.

  4. What is the maximum collector-emitter voltage for BD435?

    • The maximum collector-emitter voltage for BD435 is 45V.

  5. What is the power dissipation of BD435?

    • The power dissipation of BD435 is 40W.

  6. What are the key features of BD435?

    • BD435 features high current capability, low saturation voltage, and high transition frequency.

  7. Can BD435 be used in switching applications?

    • Yes, BD435 can be used in low-frequency switching applications.

  8. What is the typical hFE (DC current gain) of BD435?

    • The typical hFE of BD435 is 40 to 160.

  9. Is BD435 suitable for use in automotive electronics?

    • Yes, BD435 is suitable for use in automotive electronic systems such as audio amplifiers and voltage regulators.

  10. Where can I find the detailed datasheet for BD435?

    • The detailed datasheet for BD435 can be found on the manufacturer's website or through authorized distributors.