ON Semiconductor
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
BC549BTAR
Lihat Detail Lembar Data

BC549BTAR

Product Overview

Category

The BC549BTAR belongs to the category of bipolar junction transistors (BJTs).

Use

It is commonly used as a general-purpose NPN transistor in electronic circuits.

Characteristics

  • Low power, high voltage applications
  • High current gain
  • Low noise

Package

The BC549BTAR is typically available in a TO-92 package.

Essence

This transistor is essential for amplification and switching in various electronic devices and circuits.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Collector-Emitter Voltage: 30V
  • Maximum Collector-Base Voltage: 30V
  • Maximum Emitter-Base Voltage: 5V
  • Continuous Collector Current: 100mA
  • Power Dissipation: 500mW
  • Transition Frequency: 150MHz

Detailed Pin Configuration

The BC549BTAR has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High current gain
  • Low noise
  • Suitable for audio amplification and signal processing circuits

Advantages

  • Versatile and widely available
  • Low cost
  • Reliable performance in low-power applications

Disadvantages

  • Limited power handling capability
  • Relatively low switching speed compared to other transistors

Working Principles

The BC549BTAR operates based on the principles of amplification and control of current flow through its three terminals.

Detailed Application Field Plans

The BC549BTAR is commonly used in the following applications: - Audio amplifiers - Signal processing circuits - Oscillators - Switching circuits

Detailed and Complete Alternative Models

Some alternative models to the BC549BTAR include: - 2N3904 - BC547 - 2N2222

In conclusion, the BC549BTAR is a versatile and widely used NPN transistor with applications in various electronic circuits, particularly those requiring low power and high voltage capabilities.

[Word Count: 274]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan BC549BTAR dalam solusi teknis

  1. What is the BC549BTAR transistor used for?

    • The BC549BTAR is a general-purpose NPN bipolar junction transistor commonly used in amplification and switching applications.

  2. What are the typical operating conditions for the BC549BTAR?

    • The BC549BTAR operates under a maximum collector current of 100mA, with a maximum collector-emitter voltage of 30V.

  3. Can the BC549BTAR be used for audio amplification?

    • Yes, the BC549BTAR is suitable for low-power audio amplification due to its low noise and high gain characteristics.

  4. What are the pin configurations of the BC549BTAR?

    • The BC549BTAR has three pins: the emitter (E), base (B), and collector (C).

  5. Is the BC549BTAR suitable for use in low-frequency signal amplification?

    • Yes, the BC549BTAR is commonly used in low-frequency signal amplification circuits due to its high gain and low noise properties.

  6. What are some common alternatives to the BC549BTAR?

    • Common alternatives to the BC549BTAR include the 2N3904, 2N2222, and PN2222A transistors, which have similar characteristics and can be used as substitutes in many applications.

  7. Can the BC549BTAR be used in switching applications?

    • Yes, the BC549BTAR can be used in low-power switching applications due to its fast switching speed and moderate current-handling capabilities.

  8. What are the typical thermal characteristics of the BC549BTAR?

    • The BC549BTAR has a maximum junction temperature of 150°C and a thermal resistance of approximately 200°C/W.

  9. Are there any specific considerations for PCB layout when using the BC549BTAR?

    • It's important to minimize lead lengths and keep the emitter-base junction close to the collector-base junction to reduce parasitic capacitance and improve high-frequency performance.

  10. Where can I find detailed specifications and application notes for the BC549BTAR?

    • Detailed specifications and application notes for the BC549BTAR can be found in the manufacturer's datasheet and application guides, which provide comprehensive information on its electrical characteristics and recommended usage scenarios.