ON Semiconductor
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
74ACT377MTC
Lihat Detail Lembar Data

Encyclopedia Entry: 74ACT377MTC

Product Overview

Category

The 74ACT377MTC belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital electronic systems for data storage and manipulation.

Characteristics

  • The 74ACT377MTC is a high-speed octal D-type flip-flop with a transparent latch.
  • It operates on a wide voltage range, typically between 2V and 6V.
  • This IC offers low power consumption and high noise immunity.
  • It is designed to be compatible with TTL (Transistor-Transistor Logic) inputs and outputs.

Package

The 74ACT377MTC is available in a small outline surface mount package (TSSOP-20).

Essence

The essence of the 74ACT377MTC lies in its ability to store and manipulate digital data efficiently.

Packaging/Quantity

This IC is typically sold in reels or tubes, containing a quantity of 250 units per package.

Specifications

  • Supply Voltage Range: 2V to 6V
  • High-Level Input Voltage: 2V to 6V
  • Low-Level Input Voltage: 0V to 0.8V
  • High-Level Output Voltage: 2.4V (min)
  • Low-Level Output Voltage: 0.4V (max)
  • Maximum Operating Frequency: 125 MHz

Detailed Pin Configuration

The 74ACT377MTC has a total of 20 pins, which are assigned specific functions as follows:

  1. Pin 1: Data Input (D0)
  2. Pin 2: Data Input (D1)
  3. Pin 3: Data Input (D2)
  4. Pin 4: Data Input (D3)
  5. Pin 5: Data Input (D4)
  6. Pin 6: Data Input (D5)
  7. Pin 7: Data Input (D6)
  8. Pin 8: Data Input (D7)
  9. Pin 9: Clock Input (CP)
  10. Pin 10: Clock Enable Input (CE)
  11. Pin 11: Output Enable Input (OE)
  12. Pin 12: Latch Enable Input (LE)
  13. Pin 13: Output Q0
  14. Pin 14: Output Q1
  15. Pin 15: Output Q2
  16. Pin 16: Output Q3
  17. Pin 17: Output Q4
  18. Pin 18: Output Q5
  19. Pin 19: Output Q6
  20. Pin 20: Output Q7

Functional Features

The 74ACT377MTC offers the following functional features:

  • Octal D-type flip-flop with transparent latch functionality.
  • Synchronous operation with a common clock input (CP).
  • Asynchronous master reset capability (active low) through the clock enable input (CE).
  • Output enable input (OE) for tri-state output control.
  • Latch enable input (LE) for transparent latch operation.

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient data processing.
  • Wide voltage range compatibility enhances versatility.
  • Low power consumption contributes to energy efficiency.
  • High noise immunity ensures reliable performance.

Disadvantages

  • Limited number of outputs may restrict certain applications.
  • Surface mount package may require specialized equipment for soldering.

Working Principles

The 74ACT377MTC operates based on the principles of digital logic circuits. It utilizes flip-flops and latches to store and manipulate binary data. The synchronous clock input controls the timing of data storage, while the various control inputs enable specific operations such as resetting or enabling/disabling the outputs.

Detailed Application Field Plans

The 74ACT377MTC finds applications in various digital electronic systems, including but not limited to: - Microprocessors and microcontrollers - Data storage devices - Communication systems - Industrial automation - Control systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the 74ACT377MTC include: - 74HC377: A CMOS version with a wider supply voltage range. - 74LS377: A low-power TTL version with slower operation speed. - 74F377: A faster version with higher power consumption.

These alternatives can be considered based on specific requirements and constraints of the application.

In conclusion, the 74ACT377MTC is a versatile integrated circuit used for data storage and manipulation in digital electronic systems. Its high-speed operation, wide voltage range compatibility, and low power consumption make it suitable for various applications. However, its limited number of outputs and surface mount package may pose certain limitations. Understanding its specifications, pin configuration, functional features, advantages, disadvantages, working principles, and alternative models allows for informed decision-making when incorporating this IC into

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan 74ACT377MTC dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of 74ACT377MTC in technical solutions:

  1. Q: What is the 74ACT377MTC? A: The 74ACT377MTC is a type of octal D-type flip-flop integrated circuit (IC) that can store and transfer data in digital systems.

  2. Q: What is the purpose of the 74ACT377MTC? A: The 74ACT377MTC is commonly used for data storage, synchronization, and transfer in various digital applications, such as microprocessors, memory systems, and communication devices.

  3. Q: How many flip-flops are there in the 74ACT377MTC? A: The 74ACT377MTC consists of eight individual D-type flip-flops, making it an octal (8-bit) device.

  4. Q: What is the maximum clock frequency supported by the 74ACT377MTC? A: The 74ACT377MTC can typically operate at clock frequencies up to 100 MHz, depending on the specific datasheet specifications.

  5. Q: What is the voltage supply range for the 74ACT377MTC? A: The 74ACT377MTC typically operates with a voltage supply range between 4.5V and 5.5V.

  6. Q: Can the 74ACT377MTC handle both synchronous and asynchronous inputs? A: Yes, the 74ACT377MTC supports both synchronous and asynchronous inputs, allowing for flexible data transfer and synchronization.

  7. Q: What is the output drive capability of the 74ACT377MTC? A: The 74ACT377MTC has a high output drive capability, typically around 24 mA, which enables it to drive various loads in digital circuits.

  8. Q: Can the 74ACT377MTC be cascaded to increase the number of flip-flops? A: Yes, multiple 74ACT377MTC ICs can be cascaded together to increase the number of flip-flops and achieve larger data storage capacities.

  9. Q: Does the 74ACT377MTC have any built-in error detection or correction features? A: No, the 74ACT377MTC does not have any built-in error detection or correction features. It primarily focuses on data storage and transfer.

  10. Q: Are there any specific precautions to consider when using the 74ACT377MTC? A: It is important to follow the recommended operating conditions, such as voltage levels and temperature ranges, as specified in the datasheet. Additionally, proper decoupling capacitors should be used to ensure stable power supply connections.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's guidelines for the 74ACT377MTC.