ON Semiconductor
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
2N5401NLBU
Lihat Detail Lembar Data

2N5401NLBU

Product Overview

Category

The 2N5401NLBU belongs to the category of bipolar junction transistors (BJTs).

Use

It is commonly used as a general-purpose PNP transistor in various electronic circuits.

Characteristics

  • Low power dissipation
  • High current gain
  • Low noise
  • High voltage capability

Package

The 2N5401NLBU is typically available in a TO-92 package.

Essence

This transistor is essential for amplification and switching applications in electronic circuits.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Collector-Emitter Voltage: 150V
  • Collector-Base Voltage: 160V
  • Emitter-Base Voltage: 30V
  • Collector Current - Continuous: 600mA
  • Power Dissipation: 625mW
  • DC Current Gain (hFE): 100 - 300
  • Transition Frequency: 150MHz

Detailed Pin Configuration

The 2N5401NLBU has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)

Functional Features

  • High current gain
  • Low saturation voltage
  • Fast switching speed

Advantages

  • Versatile usage in various electronic circuits
  • Reliable performance
  • Wide operating temperature range

Disadvantages

  • Limited power dissipation capability
  • Sensitivity to overvoltage conditions

Working Principles

The 2N5401NLBU operates based on the principles of bipolar junction transistors, where the flow of current is controlled by the application of a small input signal at the base terminal, resulting in amplified output current at the collector terminal.

Detailed Application Field Plans

This transistor finds applications in: - Audio amplifiers - Switching circuits - Signal amplification - Voltage regulation circuits

Detailed and Complete Alternative Models

Some alternative models to the 2N5401NLBU include: - BC557 - 2N3906 - MPSA42 - S8550

In conclusion, the 2N5401NLBU is a versatile PNP transistor with a wide range of applications in electronic circuits, offering high current gain and low noise characteristics. Its compact TO-92 package makes it suitable for various design requirements, and it serves as a reliable component in amplification and switching applications.

Word Count: 320

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan 2N5401NLBU dalam solusi teknis

  1. What is the 2N5401NLBU transistor used for?

    • The 2N5401NLBU is a PNP bipolar junction transistor commonly used for amplification and switching applications in electronic circuits.

  2. What are the key specifications of the 2N5401NLBU transistor?

    • The 2N5401NLBU has a maximum collector current (IC) of 600mA, a maximum collector-base voltage (VCBO) of 160V, and a maximum power dissipation (PD) of 625mW.

  3. How can the 2N5401NLBU be used in amplifier circuits?

    • The 2N5401NLBU can be used as a small-signal amplifier in audio and other low-power applications due to its high current gain and low noise characteristics.

  4. Can the 2N5401NLBU be used for switching applications?

    • Yes, the 2N5401NLBU can be used for low-power switching applications such as turning on and off small loads in electronic circuits.

  5. What are the typical operating conditions for the 2N5401NLBU?

    • The 2N5401NLBU is typically operated at a collector current (IC) of around 100-200mA and a collector-emitter voltage (VCE) of a few volts to tens of volts.

  6. Are there any specific considerations for using the 2N5401NLBU in high-frequency applications?

    • The 2N5401NLBU may not be suitable for high-frequency applications due to its transition frequency (fT) of around 150MHz.

  7. What are the recommended thermal considerations when using the 2N5401NLBU?

    • It is important to ensure proper heat sinking or thermal management for the 2N5401NLBU to prevent overheating and ensure reliable operation.

  8. Can the 2N5401NLBU be used in temperature-sensitive environments?

    • The 2N5401NLBU has a maximum operating temperature of 150°C, so it should be used within specified temperature limits to ensure performance and reliability.

  9. What are some common alternatives to the 2N5401NLBU if it's not available?

    • Common alternatives to the 2N5401NLBU include the BC557, BC558, and 2N3906 transistors, which have similar PNP characteristics.

  10. Where can I find detailed application notes and circuit examples for the 2N5401NLBU?

    • Detailed application notes and circuit examples for the 2N5401NLBU can be found in the manufacturer's datasheet, as well as in various electronics textbooks and online resources.